Trick My Truck
#1066
#1067
so your fogs aren't working either? that is also in the switch. like Jpaye said, check the wires, and also check the prongs. often times if plugged in too forcefully or even a little off, the little prongs inside can bend. or i even had one of my wires come out of the back on a connector once, you just have to plug it back in its respective section.
#1068
Finish putting the truck back together and decided to check the headlights again since I've been gone for a week due to an emergency. When I turn the headlights on, you can hear the HID's turn on, but when I put the brights on, you can actually hear it buzzing when the lights actually turn on. So, low beams = HID's turn on, no buzzing - high beams = HID's start buzzing, lights turn on. Also remember, my fog's don't turn on anymore either.
#1072
No, the high beams would activate, but the low beams wouldn't, so when I drove around I had to have my high beams on. But I got the lights to work, I'm assuming when I gave up checking fuses and wires and put the truck back together, I never had my surfboard pod plugged in, once I finished the truck, I checked the lights and it worked. So, I'm assuming having the surfboard pod plugged in made it work.
Now my issue is my headlights and fogs. I think they aren't adjusted correctly:
Left: Low beams, Right: Low beams + Fogs
Well, today I finally put most of the truck together! Took a month and a few weeks, due to a month of training and a week of emergency and a few weeks of being busy. But here it is, the new color of the truck, still on my list:
- Steering wheel & Surround
- The surround for the odometer
- Radio surround
- Seat covers (cheaper than buying black seats)
- Passenger visor
- Console lid (hopefully done tonight)
Now my issue is my headlights and fogs. I think they aren't adjusted correctly:
Left: Low beams, Right: Low beams + Fogs
Well, today I finally put most of the truck together! Took a month and a few weeks, due to a month of training and a week of emergency and a few weeks of being busy. But here it is, the new color of the truck, still on my list:
- Steering wheel & Surround
- The surround for the odometer
- Radio surround
- Seat covers (cheaper than buying black seats)
- Passenger visor
- Console lid (hopefully done tonight)
#1074
Well, I was going to get the black lightning suede seats and get them reupholstered, but, like I was telling you on AIM, this site is a money-pit, lol. So, I decided when I get money, I'll buy the seat covers. Probably still going to get either the red stitching, or red middle if I do red on the doors like I said I was going to.
#1077
Thanks, and that's what I was thinking. What should I do for the doors, where the "leather" part near the door handles are, black or all red?
#1078