do you have to trim the fenders/wheel well to clear 33's with a 2.5" Leveling kit?
#1
do you have to trim the fenders/wheel well to clear 33's with a 2.5" Leveling kit?
i was browsing through some galleries and one guy said he had a 2.5" AS leveling kit and 33's and there were pics of where it needed to be trimmed? i have a 4x4 i dont know if that matters. also im thinking about 35's will they clear no prob? thanks
and would you have to trim a 2" to clear 33's?? thanks
and would you have to trim a 2" to clear 33's?? thanks
Last edited by K1NGoftheRanch; 12-10-2006 at 02:18 PM.
#3
#4
Originally Posted by K1NGoftheRanch
i was browsing through some galleries and one guy said he had a 2.5" AS leveling kit and 33's and there were pics of where it needed to be trimmed? i have a 4x4 i dont know if that matters. also im thinking about 35's will they clear no prob? thanks
and would you have to trim a 2" to clear 33's?? thanks
and would you have to trim a 2" to clear 33's?? thanks
#5
#7
Trending Topics
#9
#10
I am running 325/60/18 on 18X9's (with 5.5" of backspacing) and I have the 2.5" AS kit. The only "rub" that I have ever had, is when I am backing out of my driveway and turn to the left and even then it doesn't happen all the time. Just if I hit one little dip in the road, and the rub is from the driveside front tire hitting the plastic on the bottom of the bumper.
I have more pics in my gallery.
I have more pics in my gallery.
#11
#12
#14
Originally Posted by K1NGoftheRanch
cuz i get confused with the tire size thing (im totally new to trucks) there is a guy on here who is running a 2.5" as leveling kit and 18x9 wheels with a 325/60/18 tires. would these tires clear fully and would they work with a 18x9 wheel? thanks again
http://www.putfile.com/gtnumber2/images/60514
#15
Originally Posted by djh1121
Before I added my 6" lift I had a 2.5" spacer running 33x13.50x18. I only had to trim about 2" off the inner fender flare. I added a screw at the cut line and no more running. Pics are in my gallery if you want to look.
djh - don't those moto metals you are running have a +30mm offset? I didn't think they would stick out that far.