2004 - 2008 F-150

AS 2.5" Alignment and Camber Kit Poll

Thread Tools
 
Search this Thread
 
  #1  
Old 02-19-2007 | 11:08 AM
BtownFord's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 457
Likes: 0
From: Blountstown, Fl
AS 2.5" Alignment and Camber Kit Poll

Ok guys, here is the thing.

I need to know how many have installed the AS 2.5 Leveling kit and needed a camber kit to align properly and how many installed it and did not have to have the camber kit.

If you did have the camber kit what was the cost?
 
  #2  
Old 02-19-2007 | 11:17 AM
BestNTx's Avatar
Senior Member
Joined: Jun 2006
Posts: 1,166
Likes: 0
From: Fort Worth, TX
Can anyone explain what a camber kit is exactly? What does it consist of?
 
  #3  
Old 02-19-2007 | 11:23 AM
SuperSlabCab's Avatar
Senior Member
Joined: Nov 2006
Posts: 326
Likes: 0
From: Austin, Texas
I know you can add shims if necessary, but I needed nothing for my alignment.
 
  #4  
Old 02-19-2007 | 11:25 AM
hmfic's Avatar
Senior Member
Joined: Jul 2005
Posts: 1,263
Likes: 0
From: E.C. Wisconsin
I have a 2.5" A.S., did NOT need a camber kit.. Iv'e also installed a 2.5: A.S. as well as a 2" A.S. on friends trucks, They too did NOT need a camber kit.
 
  #5  
Old 02-19-2007 | 11:28 AM
BalogUK's Avatar
Senior Member
Joined: Jan 2005
Posts: 2,436
Likes: 0
From: Suwanee, GA & Montana
2.5" Autospring: NO CAMBER KIT
 
  #6  
Old 02-19-2007 | 12:42 PM
top_sgt's Avatar
Senior Member
Joined: Nov 2006
Posts: 236
Likes: 0
From: lexington, ky
2" AS.....NO camber kit,,, just an adjustment in toe!!!
 
  #7  
Old 02-19-2007 | 12:48 PM
luke280's Avatar
Senior Member
Joined: Sep 2006
Posts: 671
Likes: 0
From: Omaha, NE
Originally Posted by top_sgt
2" AS.....NO camber kit,,, just an adjustment in toe!!!
Hey TS,
Got any ideas where to get my front end aligned in Lex vegas? cheaply, of course...
 
  #8  
Old 02-19-2007 | 01:02 PM
HotBlue05SCREW's Avatar
Senior Member
Joined: May 2006
Posts: 362
Likes: 0
From: Idaho
X-2....... 2-1/2" AS and just toe in
 

Last edited by HotBlue05SCREW; 02-19-2007 at 01:05 PM.
  #9  
Old 02-19-2007 | 01:08 PM
top_sgt's Avatar
Senior Member
Joined: Nov 2006
Posts: 236
Likes: 0
From: lexington, ky
Originally Posted by luke280
Hey TS,
Got any ideas where to get my front end aligned in Lex vegas? cheaply, of course...
there's a firestone on southland drive by the railroad overpass(knew those guys when i was a mechanic). and then there's one at new circle and bryan station. i've heard "bad" stuff about the firestone on nicholasville and new circle. hope this helps some. paul miller will charge $49.95 for an alignment!!
 
  #10  
Old 02-19-2007 | 01:14 PM
cherussell's Avatar
Registered User
Joined: Sep 2004
Posts: 27
Likes: 0
From: Elizabeth City North Carolina
No Camber kit needed with my 2.5 AS
 
  #11  
Old 02-19-2007 | 01:33 PM
azfordby4's Avatar
Senior Member
Joined: Jun 2004
Posts: 301
Likes: 0
From: Chandler, Az
I have the AS 2.5" no shims or camber kit.
 
  #12  
Old 02-19-2007 | 01:42 PM
CoyCopeland's Avatar
Member
Joined: Oct 2006
Posts: 31
Likes: 0
From: Bakersfield, CA
AS 2.5 for about 4 month now and I haven't had an alignment yet. The tires do not show the slightest about of wear anywere.
 
  #13  
Old 02-19-2007 | 01:58 PM
hmfic's Avatar
Senior Member
Joined: Jul 2005
Posts: 1,263
Likes: 0
From: E.C. Wisconsin
Originally Posted by CoyCopeland
AS 2.5 for about 4 month now and I haven't had an alignment yet. The tires do not show the slightest about of wear anywere.
You need to get an alignment. If your tires haven't shown wear now they will very soon.
 
  #14  
Old 02-19-2007 | 02:30 PM
hivoltagefx4's Avatar
Senior Member
Truck of the Month
Joined: Jul 2006
Posts: 2,774
Likes: 0
From: Fairfax, Va.
I have the AS 2.5" and had it installed and aligned by my Ford dealer. No camber kit needed at all.
 
  #15  
Old 02-19-2007 | 04:29 PM
NASTY-FX4's Avatar
Senior Member
Joined: Sep 2006
Posts: 144
Likes: 0
From: Beaumont,Tx
Just Toe-In adjustment,had it done today.
 


Quick Reply: AS 2.5" Alignment and Camber Kit Poll



All times are GMT -4. The time now is 06:20 PM.