pics w/leveling kit with 35s
#7
326/65/18
There procomp x-treme AT. 325/65/18 maxx 6 rims 18x9 Click on the little black camera shows close ups of front tire turned. I had make some modifications like: shave the inner fender 1 inch and drill into the body support frame and the inner fender and stuck a bolt through the hole of the inner fender and body support frame which that pushed the inner fender back
Trending Topics
#8
#10
I have pictures in my gallery(click on black camera) some close up of the fron tires. On the picture you can see where I shave inner fender a inch and see where i pushed the inner fender in rear corner with a bolt and drilled in the body support frame. I'll be taking more pictures tomorrow if I have time. I'll get some pictures underneath the rear fender.[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Last edited by 05extcabflare; 04-23-2007 at 11:14 PM.
#13
315/70/17
thats 34.5x12x17. You might be ok with no mods. Its really hard to say. Mine are 35x13.5x18 tires. I'll get some close ups today and I'll measure my backspacing. When I ordered my tires and rims I told 4x4 shop I need these tires to fit without to much sticking out. I'm not sure if i like these tires because they through rocks because of the aggresive tread. Things I overlooked when i bought these tires. I always here rocks hitting underneath and side of truck. I gringe when they hit the paint.
That bolt you see when close up of the tires is not a stock bolt. I added that bolt to push inner fender back. that bolt mounted to inner body mount support
That bolt you see when close up of the tires is not a stock bolt. I added that bolt to push inner fender back. that bolt mounted to inner body mount support
Last edited by 05extcabflare; 04-24-2007 at 05:05 PM.
#14
#15