Tailgate Handle
#4
1. remove access panel on inside of tailgate held on by 8 torx head screws (under bedliner cover if you have one)
2. remove 2 10mm nuts
3. remove handle
4. remove c-clip and pull out lock cylinder
5. install old lock cylinder into new handle, retain with c-clip
6. reinstall handle, replace access panel
7. drink a beer, your done.
2. remove 2 10mm nuts
3. remove handle
4. remove c-clip and pull out lock cylinder
5. install old lock cylinder into new handle, retain with c-clip
6. reinstall handle, replace access panel
7. drink a beer, your done.