cb mount options with low profile toolbox. no mag mounts.
#16
#19
Heres a flat mount that should be long enough to go right past the rails -
http://www.walcottcb.com/workman-thm...ath=28_353_433
This is the mounting plate that im planning on using.
http://www.walcottcb.com/workman-thm...ath=28_353_433
This is the mounting plate that im planning on using.
#20
any used this kinda mount
http://www.walcottcb.com/firestik-ss...l?cPath=28_353
to mount a firestik or simmilar ant. to, im getting a low profile toolbox i believe, and want to mount it towards the front of the bed, not off the back of the toolbox.
anyone have pictures of either way?
that flat bar mount im guessing can be mounted to the underside of the toolbox poking out the side, so its sandwiched between the box and the bed.
how would the ground wire run?
http://www.walcottcb.com/firestik-ss...l?cPath=28_353
to mount a firestik or simmilar ant. to, im getting a low profile toolbox i believe, and want to mount it towards the front of the bed, not off the back of the toolbox.
anyone have pictures of either way?
that flat bar mount im guessing can be mounted to the underside of the toolbox poking out the side, so its sandwiched between the box and the bed.
how would the ground wire run?
Best pic I got-there is another antenna mounted on driver side for scanner antenna. This one is a 4' wilson antenna with 3" spring
Excuse the mess-some lady backed into me-just about got it all fixed now