2009 - 2014 F-150

HOW TO: USB 2 to Glove Box install (no console)

Thread Tools
 
Search this Thread
 
  #61  
Old 10-06-2010, 09:08 PM
rob1211's Avatar
Member
Join Date: Aug 2010
Location: N.J
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Hope this dont sound stupid BUT.. What is the part number or where can I get the cable that plugs into the back of the radio to do this mod ?

Thanks Rob
 
  #62  
Old 10-08-2010, 09:12 AM
formuladriver01's Avatar
Senior Member
Join Date: Apr 2007
Location: Andersen AFB, Guam
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rob1211
Hope this dont sound stupid BUT.. What is the part number or where can I get the cable that plugs into the back of the radio to do this mod ?

Thanks Rob
The part # is 9L3Z14D202A. This is the factory cable. But...

DO NOT ORDER THIS CABLE UNLESS YOU WANT TO MODIFY IT!

If you look at the stock cable that came with the truck; you will see that there is a corner that is cut off and grooved. The other USB port is opposite. If you order the cable you will have to cut the corner that is not cut and sand it down. Once its cut and sanded down it will connect. Its a really snug fit.
 
  #63  
Old 10-08-2010, 09:07 PM
Fishhawk460's Avatar
Senior Member
Join Date: Apr 2010
Location: USA
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
No need to pay up for a Ford cable. Just got to Micro Center of even E-Bay and get an 3' USB to Mini cable and a Female USB to mini adapter. $10.00 for the cable and $3.00 for the adapter. Velcro the hard drive to the back of your glove box and nothing will move, unless you want it to.
 
  #64  
Old 10-10-2010, 04:03 PM
scandalous's Avatar
Junior Member
Join Date: Sep 2010
Location: West Texas
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Had a cable and adapter lying around so I just did this and it works pretty good, took not even 5 mins! Thanks for the tip!

In case anyone needs to order some cables Monoprice.com has them cheap.

USB A Female to Mini 5 pin (B5) Male Adapter $1.84

USB 2.0 A Male to Mini-B 5pin Male 28/24AWG Cable w/ Ferrite Core - (Gold Plated) - 3ft $1.19
 
  #65  
Old 10-10-2010, 10:22 PM
F150Aggie's Avatar
Technical Article Contributor

Thread Starter
Join Date: Feb 2001
Location: College Station TX
Posts: 425
Likes: 0
Received 0 Likes on 0 Posts
I love monoprice, I'll put your links in my original post.
 
  #66  
Old 10-22-2010, 12:03 PM
jmcavalieri's Avatar
Member
Join Date: Oct 2010
Location: Western NY
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Just added the wire. Pretty easy "mod". Looking to get a USB-female to female adapter so that I can plug a phone or additional iPod/zune into it.
 
  #67  
Old 10-22-2010, 12:05 PM
jmcavalieri's Avatar
Member
Join Date: Oct 2010
Location: Western NY
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
I used an old Blackberry cable I had. FREE! It was for the Pearl or Curve, and I have a bunch of them. If someone wants one, I have 1 or 2 left. Just paypal me for the shipping cost and I'll mail it out.
 
  #68  
Old 10-28-2010, 04:17 PM
5pointslow's Avatar
Member
Join Date: Jan 2004
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
what is the point of the second usb port on teh back of the radio?
 
  #69  
Old 10-28-2010, 08:46 PM
10-Ford's Avatar
Junior Member
Join Date: Aug 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by scandalous
Had a cable and adapter lying around so I just did this and it works pretty good, took not even 5 mins! Thanks for the tip!

In case anyone needs to order some cables Monoprice.com has them cheap.

USB A Female to Mini 5 pin (B5) Male Adapter $1.84

USB 2.0 A Male to Mini-B 5pin Male 28/24AWG Cable w/ Ferrite Core - (Gold Plated) - 3ft $1.19
I ordered my parts from Monoprice as well, but can't do the install until I get back home in a couple of weeks.
However, if anyone is interested installing a USB port inside their console...I plan on using the above adaptor, a M-F A cable, and a USB port saver:
http://www.monoprice.com/products/se...=4811&x=14&y=8

I figure I'll be able to cut a small hole inside the console and install the port saver to have a finished port that any USB cable can be plugged into (or removed) at will
 
  #70  
Old 11-16-2010, 11:16 PM
Projectile's Avatar
Junior Member
Join Date: Nov 2010
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
This is not working for me and my iPod nano.

I know the iPod is not the problem because it works fine in the USB jack on the dash.

I bought the monoprice USB female to USB mini male connector. The mini USB end of that went into the USB2 slot on the sync module. I plugged the USB end of my iPod cable into that, and then connected the cable to my iPod, but the iPod doesn't get power and my 2010 F150 tells me that USB2 is empty.

Please help.
 
  #71  
Old 11-17-2010, 01:32 AM
eye.surgeon's Avatar
Member
Join Date: Nov 2010
Location: California
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Projectile
This is not working for me and my iPod nano.

I know the iPod is not the problem because it works fine in the USB jack on the dash.

I bought the monoprice USB female to USB mini male connector. The mini USB end of that went into the USB2 slot on the sync module. I plugged the USB end of my iPod cable into that, and then connected the cable to my iPod, but the iPod doesn't get power and my 2010 F150 tells me that USB2 is empty.

Please help.
Same here, my ipod nano works fine plugged into the console USB in my 2010, but doesn't work with an adapter cable plugged into either USB or USB2 as others are doing. I'm mystified. Is it a Nano thing?
 
  #72  
Old 11-22-2010, 11:45 PM
eye.surgeon's Avatar
Member
Join Date: Nov 2010
Location: California
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Update...there must have been some issue with the cable I was using, because I ordered a different one and now it works fine with my nano.
 
  #73  
Old 01-04-2011, 08:10 PM
TullyMars's Avatar
Member
Join Date: Jan 2010
Location: Wake Co NC
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
640 gb drive just arrived, will pick up remaining parts tomorrow


anything special I need to do to configure the drive so that it works?


I also think I'm gonna edit my music collection, delete my tunes on my zune then reload so I'll have less trash to filter through
 
  #74  
Old 01-04-2011, 08:45 PM
jmmec's Avatar
Member
Join Date: Nov 2010
Posts: 72
Likes: 0
Received 0 Likes on 0 Posts
Your hard drive is probably already formatted as a FAT32 filesystem, but if it happens to be NTFS, then I've heard that SYNC doesn't support NTFS. In that case, you'd need to reformat it to FAT32 - some simple instructions if using a Windows computer:

http://www.ehow.com/how_5099070_conv...-ntfs-fat.html
 
  #75  
Old 01-13-2011, 09:34 PM
GTXKen's Avatar
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Fishhawk460
Nothing will run on Windows 7 ..... However I was able to load SwissKnife to my Windows XP machine and was able to format the disk in FAT32 ..... and it works. Really appreciate the help guys. Now once I get the adapter in the mail I'll try the USB2.

(Update): The Swissknife app only left 60G of HDD space to use (out of 320G). I went to the Verbatim site and found their FAT32 download and "viola" all 320G of hard drive is available now.
Got to say, for the inexpensive cost of this "mod" the cool factor is high. I velcroed the hard drive to the back side of the glove box and everything is out of sight, even if you open the glove box.
I doubt if I'll ever use the CD player considering I can just about load my entire music collection.
Big thanks to Fishhawk for this bit - I installed mine tonight in 10 minutes , grabbed the Fat 32 format tool off the Verbatim site and was all good!
 


Quick Reply: HOW TO: USB 2 to Glove Box install (no console)



All times are GMT -4. The time now is 06:40 PM.