tool box for 09-10 Supercrew???
#17
I know how you feel. The low pro box I had in my 03 didnt fit inside the bed of my 09 either. I have a box the fits inside cause of my cap.
I had to add feet to the bottom of the box to clear the bump for the fuel neck that is between the wheel hump and cap. Pretty stupid, but worked and still fits below the rails.
I'll get a pic later
I had to add feet to the bottom of the box to clear the bump for the fuel neck that is between the wheel hump and cap. Pretty stupid, but worked and still fits below the rails.
I'll get a pic later
#18
Thanks!
Slim
#19
... I guess I just gave up too quick when the DeeZee brand "tractor supply" box wouldn't fit. I'll look into Kobalt and UCW. And Tford, It's a 5.5 box. I think since Ford put some length into the body of the truck, but not into the distance between front and rear wheels (whatever the technical term is) it moved the wheel wells forward in the box causing me issues..
As for the internal dimensions of the bed, I do not believe they have changed from the 04-08s to the 09/10s.
Sounds about like my RKI box. They make a low profile box that has the same depth (from bed rail), but the above bed rail height is 2-3" high.....MUCH better than the one I have. Mine would be fine on a leveled truck with a 6.5" bed though.
Last edited by heybeermantx; 03-23-2010 at 02:58 PM.
#20
#21
If the 09/10 beds changed wheel well position, but maintained the 5.5" length that the 04-08 have, then the cutouts for the wheel wells should not line up anymore.
I do agree about a deep box possibly hitting the wheel wells and checking numbers or doing a test fit before you commit.