Have a issue with speed
#16
Ok computer police for the record im not racing around i drive for a living put hundreds of mile a day in big trucks Im just asking a Question. Just wanting to know what its capable of, thats it .I have had trucks my whole life and use my licence for a living so Im not out racing around with daddys truck so kill the cr----p about oh thats dangerous. Just asking a question . But lets just say one day u need to go fast for any reason Im shore u would like know what it could do
#18
I also understand your desire to know what your truck can do. I think every man wants to know how fast their ride is. It is just better to do that sort of stuff at a race track, not on the streets.
#19
Ok computer police for the record im not racing around i drive for a living put hundreds of mile a day in big trucks Im just asking a Question. Just wanting to know what its capable of, thats it .I have had trucks my whole life and use my licence for a living so Im not out racing around with daddys truck so kill the cr----p about oh thats dangerous. Just asking a question . But lets just say one day u need to go fast for any reason Im shore u would like know what it could do
But i do remember when I thought I had to go fast also. I at one time had one of the fastest street cars in my area, and I set out to prove it everyday. Just make sure you live long enough to out grow it. I can tell you from experience. Auto accidents can not just kill you. bu they can make you spend years wishing you were dead, and I was only doing about 10 over the last accident I had. It wasn't even my fault. The same thing coulda happened if I were doing the speed limit.
#20
I really don't understand why anyone would want to go fast in one of these trucks. Were talking about 16 second vehicles through the 1/4 mile which is far from impressive, trucks are about as aerodynamic as a brick. Anybody who thinks these trucks are "fast" are sadly mistaken. On top of that look at how trucks handle in general, now think about them handling at 90 plus driving down the freeway. I see people all the time driving like idiots down the freeway and when they change lanes the body roll is insane. Most trucks out there dont even have tires that are rated for speeds over 100 anyways. I still like to enjoy mine though from time to time. Its kinda fun to open it up through first and second gear but after that it just takes forever to get anywhere, lol. Basically if you want to go fast then get a car built for it. You will still look like an idiot driving down the freeway at 100 plus but at least you will be safer, lol.
#21
I just think all of us like to go fast every once in a while. I saw on the news last week where a 70 yr old grandma was clocked doing over 100, when she was stopped and asked why she was going so fast, she replied "I was late for my hair appointment" LOL So see no matter what age we are we still like fast sometimes.
#22
#23
To each his or her own, I for one don't need to do over 90 in mine.
I challenge the comment about break in..
The motor is broken in after the first 20 minutes of operation or so, the rings and bearings are seated and you are done. Race motors are built, run for 20 minutes, then tuned on a dyno, run at 7 to 10 grand and then their next step is the track. A modern truck motor is precision built (not like the old days - sorry guys but back in the day most stock motors were sloppy crap) and does not require an extended brak in period. Wear is a different story, the engine will wear faster at high RPM, greater stress on parts when they move faster, the pistons are moving so fast in the cylinder that rods, bolts bearings and even the crank get stressed. What that limit is I don't know but apparently Ford decided what was optimal for the life of the motor they built or maybe it was for safety/legal reasons, who knows. I say if you want to go faster and maybe do so damage its your call and your dime.
I challenge the comment about break in..
The motor is broken in after the first 20 minutes of operation or so, the rings and bearings are seated and you are done. Race motors are built, run for 20 minutes, then tuned on a dyno, run at 7 to 10 grand and then their next step is the track. A modern truck motor is precision built (not like the old days - sorry guys but back in the day most stock motors were sloppy crap) and does not require an extended brak in period. Wear is a different story, the engine will wear faster at high RPM, greater stress on parts when they move faster, the pistons are moving so fast in the cylinder that rods, bolts bearings and even the crank get stressed. What that limit is I don't know but apparently Ford decided what was optimal for the life of the motor they built or maybe it was for safety/legal reasons, who knows. I say if you want to go faster and maybe do so damage its your call and your dime.
#25
To each his or her own, I for one don't need to do over 90 in mine.
I challenge the comment about break in..
The motor is broken in after the first 20 minutes of operation or so, the rings and bearings are seated and you are done. Race motors are built, run for 20 minutes, then tuned on a dyno, run at 7 to 10 grand and then their next step is the track. A modern truck motor is precision built (not like the old days - sorry guys but back in the day most stock motors were sloppy crap) and does not require an extended brak in period. Wear is a different story, the engine will wear faster at high RPM, greater stress on parts when they move faster, the pistons are moving so fast in the cylinder that rods, bolts bearings and even the crank get stressed. What that limit is I don't know but apparently Ford decided what was optimal for the life of the motor they built or maybe it was for safety/legal reasons, who knows. I say if you want to go faster and maybe do so damage its your call and your dime.
I challenge the comment about break in..
The motor is broken in after the first 20 minutes of operation or so, the rings and bearings are seated and you are done. Race motors are built, run for 20 minutes, then tuned on a dyno, run at 7 to 10 grand and then their next step is the track. A modern truck motor is precision built (not like the old days - sorry guys but back in the day most stock motors were sloppy crap) and does not require an extended brak in period. Wear is a different story, the engine will wear faster at high RPM, greater stress on parts when they move faster, the pistons are moving so fast in the cylinder that rods, bolts bearings and even the crank get stressed. What that limit is I don't know but apparently Ford decided what was optimal for the life of the motor they built or maybe it was for safety/legal reasons, who knows. I say if you want to go faster and maybe do so damage its your call and your dime.
Believe it or not, there are still carbon atoms in the steel that temperature and the tempering of the steel, that break in does make a difference in the life of the engine.
#26
Its there for tire rating.
I don't like it cause every once in a while lets say your behind a long line of slow pokes on a 2 lane highway and you wait and wait and eventually you can pass and alls good and then bang someone appears out of the blue (rolling hills or no lights at dusk WHATEVER) and you need to get by NOW and then just before you easily make it... wack... Limiter. It sucks.
If once a year I find myself in a position where I need to go 1 or 2 or 5 mph over that limit... I think I should be able to.
I don't like it cause every once in a while lets say your behind a long line of slow pokes on a 2 lane highway and you wait and wait and eventually you can pass and alls good and then bang someone appears out of the blue (rolling hills or no lights at dusk WHATEVER) and you need to get by NOW and then just before you easily make it... wack... Limiter. It sucks.
If once a year I find myself in a position where I need to go 1 or 2 or 5 mph over that limit... I think I should be able to.
#27
I don't like it cause every once in a while lets say your behind a long line of slow pokes on a 2 lane highway and you wait and wait and eventually you can pass and alls good and then bang someone appears out of the blue (rolling hills or no lights at dusk WHATEVER) and you need to get by NOW and then just before you easily make it... wack... Limiter. It sucks.
Last edited by seadragon; 06-04-2010 at 01:28 PM.
#28
I don't believe it. If you are getting your motor hot enough to temper steel you have real problems.
#29
#30
Plus, Do you remember the first oil change is at a shorter interval. There are particals of metal just laying around in the engine. But that's OK. It's all good. It's broke in when it leaves the assembly line, during the drive to the parking lot. You're good to go!