OEM Skid Plates for '09-'11 ?
#1
OEM Skid Plates for '09-'11 ?
Guys - anyone have the part numbers for the front, center and tank skid plates with all the bolts and straps handy? Looking to add them to my rig.
Tasca has them but the parts explosion diagram has so many components - not sure if I need them all, etc.
Here is what I think is correct:
9L3Z-5D032-A (Front)
9L3Z-7E063-A (Mid)
9L3Z-9A147-D (Fuel Tank)
Thanks in advance!!!
Tasca has them but the parts explosion diagram has so many components - not sure if I need them all, etc.
Here is what I think is correct:
9L3Z-5D032-A (Front)
9L3Z-7E063-A (Mid)
9L3Z-9A147-D (Fuel Tank)
Thanks in advance!!!
#6
I have installed a lift on my 09 F150 Screw FX4 and have the original Ford Skid Plate and many other oem parts if your still interested in buying. I'm not sure what they go for but if your interested in mine, make an offer and we may be able to make a deal. I also have a whole box of original hardware that shop gave me, may be able to find the hardware for it as well. Truck only had about 30k miles when lift was installed so parts are in very good condition. I live in Mechanicsville, VA 23111, which I am willing to drop off at ups or fedex if you pay shipping. You may also email me at mwcarter41@yahoo.com
#7
Trending Topics
#8
#9
I would certainly go for a much sturdier aftermarket plate than the OEM because the OEM are quite flimsy, IMO (they flex easily with your finger) whereas aftermarket stuff is usually 1/4" thick or more and can take way more abuse than the OEM stuff.
Unless you can get the factory components very cheap and cost becomes an overriding issue...
Unless you can get the factory components very cheap and cost becomes an overriding issue...
#10