Very frustrated with these water spots. With pics
#1
Very frustrated with these water spots. With pics
So I first got these spots from the nasty water sprinklers here in FL. They have been there for awhile as i never knew about using a polisher. I washed the truck well, started out with an orange pad with wolfgang 3.0 swirl remover. Put that on my DA polisher and hit it twice within a half hour. Still wasnt off so i used the Autp Glym super resin polish on the DA with orange pad and this is what im stuck with so far. Do i do another application? The pictures show what is left. Im afraid i might start to wear on the clear coat if i continue. Does anyone have any ideas for continuing?
#4
#5
To get the ones that baked into my black truck from my stupid sprinklers and a week of 100+ degree sun, I had to clay bar, then ultimate compound with an orbital, then clay bar again, then one last compound with the orbital, then polish/wax. That was 2 weeks ago and my shoulders are still sore, but the truck looks great!
#6
#7
You may think I am insane with my answer but if the problem you are having is the hard water coming out of your sprinkler than those water spots are probably calcium deposits. And the best thing to get rid of calcium deposits is just simply pouring white vinegar over the spots, wiping them off with a sponge, repeat if necessary, and then rinse with water. Vinegar does a great job getting rid of the deposits and will not harm the clear coat. Then you can simply polish/ wax again if you so desire.
Unfortunately, I had to do this several times to my truck because the parking garage at work leaks when it rains and if you truck is parked in the wrong spot the water leaks on it leaving large calcium deposits. The first time it happened to me I went beserk and tried all sorts of cleaners/polishers on it (to the point of scratching the cleat coat on my expedition) and then someone told me about the vinegar trick. I since learned where to park so that I do not get the water leaking on my truck anymore but if it does at least now I know what to do it.
Good luck!
Unfortunately, I had to do this several times to my truck because the parking garage at work leaks when it rains and if you truck is parked in the wrong spot the water leaks on it leaving large calcium deposits. The first time it happened to me I went beserk and tried all sorts of cleaners/polishers on it (to the point of scratching the cleat coat on my expedition) and then someone told me about the vinegar trick. I since learned where to park so that I do not get the water leaking on my truck anymore but if it does at least now I know what to do it.
Good luck!
Trending Topics
#8
Cleaner Wax
Use a good "Cleaner Wax" I like Meguires. It works for me everytime. I used to work at a carwash in Orlando and that was how I learned to best remove Florida hard water spots.
Follow up that Cleaner Wax with a good Carnuba wax. If your using a orbital polisher it wont take you too long.
Follow up that Cleaner Wax with a good Carnuba wax. If your using a orbital polisher it wont take you too long.
#9
You may think I am insane with my answer but if the problem you are having is the hard water coming out of your sprinkler than those water spots are probably calcium deposits. And the best thing to get rid of calcium deposits is just simply pouring white vinegar over the spots, wiping them off with a sponge, repeat if necessary, and then rinse with water. Vinegar does a great job getting rid of the deposits and will not harm the clear coat. Then you can simply polish/ wax again if you so desire.
Good luck!
Good luck!
#10
To get the ones that baked into my black truck from my stupid sprinklers and a week of 100+ degree sun, I had to clay bar, then ultimate compound with an orbital, then clay bar again, then one last compound with the orbital, then polish/wax. That was 2 weeks ago and my shoulders are still sore, but the truck looks great!
Claying after using Ultimate Compound is really going to be a wasted step as UC as a paint cleaner will remove contaminants that claying will not. If first go around with UC doesn't do the trick then give it another go or use a slightly more aggressive pad and or reduce your working area to a smaller size.
#11
Claying after using Ultimate Compound is really going to be a wasted step as UC as a paint cleaner will remove contaminants that claying will not. If first go around with UC doesn't do the trick then give it another go or use a slightly more aggressive pad and or reduce your working area to a smaller size.
#13
ALL GOOD SUGGESTIONS BUT TRY THIS.
http://www.3dproducts.com/Eraser-Wat...16-Oz-Gel.html
I'M NOT A REP FOR THE COMPANY, I RUN A MOBILE AUTO DETAILING SERVICE WITH MY 2010 F150. I'VE HAD GOOD SUCCESS WITH LESS ELBOW GREASE REMOVING CUSTOMERS WATER SPOTS. ALWAYS REMEMBER TO HAVE A GOOD SEALANT APPLIED AT LEAST ONCE A YEAR.
http://www.3dproducts.com/Eraser-Wat...16-Oz-Gel.html
I'M NOT A REP FOR THE COMPANY, I RUN A MOBILE AUTO DETAILING SERVICE WITH MY 2010 F150. I'VE HAD GOOD SUCCESS WITH LESS ELBOW GREASE REMOVING CUSTOMERS WATER SPOTS. ALWAYS REMEMBER TO HAVE A GOOD SEALANT APPLIED AT LEAST ONCE A YEAR.
#14
ALL GOOD SUGGESTIONS BUT TRY THIS.
http://www.3dproducts.com/Eraser-Wat...16-Oz-Gel.html
I'M NOT A REP FOR THE COMPANY, I RUN A MOBILE AUTO DETAILING SERVICE WITH MY 2010 F150. I'VE HAD GOOD SUCCESS WITH LESS ELBOW GREASE REMOVING CUSTOMERS WATER SPOTS. ALWAYS REMEMBER TO HAVE A GOOD SEALANT APPLIED AT LEAST ONCE A YEAR.
http://www.3dproducts.com/Eraser-Wat...16-Oz-Gel.html
I'M NOT A REP FOR THE COMPANY, I RUN A MOBILE AUTO DETAILING SERVICE WITH MY 2010 F150. I'VE HAD GOOD SUCCESS WITH LESS ELBOW GREASE REMOVING CUSTOMERS WATER SPOTS. ALWAYS REMEMBER TO HAVE A GOOD SEALANT APPLIED AT LEAST ONCE A YEAR.
#15
First off quit jumping to the most agressive polish/pad combo right off the batt you will just agrivate the situtaion. Try the vinegar and if that does not do the trick and if the agressive polish pad combo have not touched it, it's time to take it to a pro to correct the problem because if the water spots are etched into the clear the only way to get rid of them is wet sanding and I do not recomend that you do this on your own because you can dig your self into a very deep and expensive hole quickly if you don't know what you are doing. Post this in the Detailing section or join the Detailers Cafe and let some of the guys over there look at this and give you some suggestions.