WIP 2012 S'Crew Build
#48
#49
Thanks again for the compliment I would like to see how you do yours if you make a thread send me a link.
#52
Glossy Pillars and wheels
Took off my snow tires and did the glossy pillar mod in preparation for my platinum handles. Enjoy.
IMG_20130408_114259 | Flickr - Photo Sharing! IMG_20130408_114259 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114249 | Flickr - Photo Sharing! IMG_20130408_114249 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114244 | Flickr - Photo Sharing! IMG_20130408_114244 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114228 | Flickr - Photo Sharing! IMG_20130408_114228 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114259 | Flickr - Photo Sharing! IMG_20130408_114259 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114249 | Flickr - Photo Sharing! IMG_20130408_114249 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114244 | Flickr - Photo Sharing! IMG_20130408_114244 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
IMG_20130408_114228 | Flickr - Photo Sharing! IMG_20130408_114228 | Flickr - Photo Sharing! by AirsoftF150, on Flickr
Last edited by AirsoftF150; 04-08-2013 at 08:02 PM. Reason: no idea why I cannot embed pics in here.
#53
Air, looks good, your truck is really coming along. Don't forget about the fender liners, I purchased a set off of e-bay and installed them myself, and what a difference in looks and protection for the underside of the bed. Before I had installed the fender liners, I changed out the stock taillamp housings for the Raptor/HD set and I was shocked at how much dirt/sand was all over the backside of the taillight housings and the inside of the bed walls, etc.,...these should come stock from the factory...
#56
Air, looks good, your truck is really coming along. Don't forget about the fender liners, I purchased a set off of e-bay and installed them myself, and what a difference in looks and protection for the underside of the bed. Before I had installed the fender liners, I changed out the stock taillamp housings for the Raptor/HD set and I was shocked at how much dirt/sand was all over the backside of the taillight housings and the inside of the bed walls, etc.,...these should come stock from the factory...
#57
Hyannis Yacht club over the harbor.
2012 F-150 S'Crew | Flickr - Photo Sharing! 2012 F-150 S'Crew | Flickr - Photo Sharing! by AirsoftF150, on Flickr
2012 F-150 S'Crew | Flickr - Photo Sharing! 2012 F-150 S'Crew | Flickr - Photo Sharing! by AirsoftF150, on Flickr
#58
Ordered primed mirror caps. Will be having them painted to match the truck and installing them soonish. I hope to have my handles installed within the next week because they do not look nearly as good in the FoMoCo box then they would on my truck.
My next mod after this will be installing the Limited/Harley bumper/valance.
My next mod after this will be installing the Limited/Harley bumper/valance.
#59
PTM & Chrome handles installed
Well I finished my painted handles install this morning. The tailgate, and the passenger handles went on maybe 20/30 mins each and then the driver side took quite a bit of effort. Everything is installed now and working fine and looks great on the truck. Now all I have to do is paint my primed mirror caps. Those came in from Tasca this past week I am waiting on the paint & clearcoat from automotive touch up.
Enjoy.
Enjoy.