What screen are you using?
#16
I have the XLT, and on the top line, called gauges, I have 3 screens, one is the tranny temperature, the middle screen is a compass showing the truck orientation superimposed on it, and can be fixed north or rotating north.
The third screen on my XLT is also blank. The manual says it is blank, but they show 4 screens, one being the 2-speed Auto 4X4 displays power distribution between front and rear wheels.
I don't have that screen, but if I scroll down to "Truck Apps", I get a diagram of the drive system. Since I have not really engaged 4 wd yet, not sure what it looks like. It is supposed to show when it's in 4wd, tilt angle and bank angle in degrees and a lot more. Probably need to experiment a little with this screen. I think it is the screen shown in the manual but moved down to it's own line.
I also have the trip a/b and settings like door locks, lights staying on after shutting off etc.
The third screen on my XLT is also blank. The manual says it is blank, but they show 4 screens, one being the 2-speed Auto 4X4 displays power distribution between front and rear wheels.
I don't have that screen, but if I scroll down to "Truck Apps", I get a diagram of the drive system. Since I have not really engaged 4 wd yet, not sure what it looks like. It is supposed to show when it's in 4wd, tilt angle and bank angle in degrees and a lot more. Probably need to experiment a little with this screen. I think it is the screen shown in the manual but moved down to it's own line.
I also have the trip a/b and settings like door locks, lights staying on after shutting off etc.
Neither my Platinum or FX4 have any additional Gauge screens, so now thinking those are blank if you have higher content (like Navigation) since that information is displayed elsewhere.
#20
Dec 21st build
Using the left side of steering wheel, the swith with OK in the middle, push up on the top switch of the 4 directional switches.
On the instrument panel, in between the tach and speedometer, look for a verticle string of messages. If you go up using the switch, you should get to "gauges". Then using the left/right switches, toggle to the right, or left to see what gauges show. Works on my XLT.
#22