2009 - 2014 F-150

Help Us Test DECKED Truck Bed Storage System?

Thread Tools
 
Search this Thread
 
  #16  
Old 01-25-2016 | 01:41 PM
DECKED's Avatar
Thread Starter
|
Former Sponsor
Joined: Dec 2015
Posts: 74
Likes: 0
Originally Posted by thelariat02
What about flareside 07 f150s? I know you said heritage step side it wouldn't work.
Hi Thelariat02,
We don't fit with any of the flareside/stepside beds. The reason being the bed is so narrow that there is not room for the ammo cans which are the foundation of the system. Sorry!
 
  #17  
Old 01-26-2016 | 10:23 AM
thelariat02's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,519
Likes: 2
From: U.P. of Michigan
Originally Posted by DECKED
Hi Thelariat02,
We don't fit with any of the flareside/stepside beds. The reason being the bed is so narrow that there is not room for the ammo cans which are the foundation of the system. Sorry!
No problem thank you for the response
 
  #18  
Old 01-27-2016 | 11:03 AM
DECKED's Avatar
Thread Starter
|
Former Sponsor
Joined: Dec 2015
Posts: 74
Likes: 0
Originally Posted by Wookie
Is there a way to mount a couple of bikes on top of the platform?
Apologies if we missed this question! Yes you can. We have steel tubes which run through the deck and you can bolt about anything to them. They are 1/2" wide. We make a T-Track unit which allows you to adapt Thule and Yakima rack systems to the deck itself: http://shop.decked.com/product-p/at3.htm
 
  #19  
Old 01-27-2016 | 11:40 AM
Wookie's Avatar
Senior Member
Joined: Sep 2002
Posts: 2,165
Likes: 3
From: Cabot, AR
Originally Posted by DECKED
Apologies if we missed this question! Yes you can. We have steel tubes which run through the deck and you can bolt about anything to them. They are 1/2" wide. We make a T-Track unit which allows you to adapt Thule and Yakima rack systems to the deck itself: http://shop.decked.com/product-p/at3.htm
Do the T Tracks lock to the deck or come with tamper resistant fasteners? I couldn't tell that from the web site. I can't tell how high the decked unit sits above the bed floor to know if the factory tiedown points will be blocked. Currently I use these with a cable lock to secure my bike. My main concern is locking expensive bikes up in the bed. Otherwise your product looks pretty good. It would look even better in the back of my Platinum F150!
 
  #20  
Old 01-27-2016 | 02:44 PM
DECKED's Avatar
Thread Starter
|
Former Sponsor
Joined: Dec 2015
Posts: 74
Likes: 0
Originally Posted by Wookie
Do the T Tracks lock to the deck or come with tamper resistant fasteners? I couldn't tell that from the web site. I can't tell how high the decked unit sits above the bed floor to know if the factory tiedown points will be blocked. Currently I use these with a cable lock to secure my bike. My main concern is locking expensive bikes up in the bed. Otherwise your product looks pretty good. It would look even better in the back of my Platinum F150!
T-Tracks bolt to the deck. If a person crawled in the back of your truck and used a screw gun they could theoretically remove the tracks. Probably easier just to cut your rack off. The Tie downs are actually used by the system to secure it to the bed. And they are covered. However, removing tie downs takes about 2 seconds for a thief with the right tool.....
 
  #21  
Old 01-27-2016 | 05:48 PM
DECKED's Avatar
Thread Starter
|
Former Sponsor
Joined: Dec 2015
Posts: 74
Likes: 0
Congrats to kingranchcoy - decked tester selected!

Originally Posted by KingRanchCoy
Id be interested also!

Computer parts for my business.
Straps, Chains and riding gear for my Atv's
General Hand Tools along with Jack, 4 way, Jumper Cables Etc.


Also with 2000 pounds sounds like i could put my Atv on top, That would work out perfect! When we go ride i have to load the atv on a trailer and the bed is used for all the accesories and riding gear. With this setup it would work perfect and would be able to ditch the trailer



Hey everyone,
Thanks for the participation in our query for a DECKED tester. We have a pretty tough time choosing as there were a number of great applicants! In the end KingRanchCoy stood out with his involvement in the forums, location (hell yea Texas!), and intended use. We look forward to his review!

We have a special limited time offer for anyone who participated in this thread. We are offering a $300 off deal to anyone who posted their truck in this thread. Just send us a private message with a screenshot of your entry and we will send you a code. This offer is good for the next 7 days. Please respect the timeframe with any requests.

Thanks again and we look forward to hearing how KingRanch likes his DECKED system!
 
  #22  
Old 01-27-2016 | 05:49 PM
DECKED's Avatar
Thread Starter
|
Former Sponsor
Joined: Dec 2015
Posts: 74
Likes: 0
Congrats to kingranchcoy - decked tester selected!

See above ^ for our selected DECKED tester!
 
  #23  
Old 01-27-2016 | 06:01 PM
KingRanchCoy's Avatar
Senior Member
Joined: Sep 2008
Posts: 3,480
Likes: 6
From: San Angelo, TX
Originally Posted by DECKED
Hey everyone,
Thanks for the participation in our query for a DECKED tester. We have a pretty tough time choosing as there were a number of great applicants! In the end KingRanchCoy stood out with his involvement in the forums, location (hell yea Texas!), and intended use. We look forward to his review!

We have a special limited time offer for anyone who participated in this thread. We are offering a $300 off deal to anyone who posted their truck in this thread. Just send us a private message with a screenshot of your entry and we will send you a code. This offer is good for the next 7 days. Please respect the timeframe with any requests.

Thanks again and we look forward to hearing how KingRanch likes his DECKED system!
Thanks! Sent you a PM. Definitely ready to try it out!
 
  #24  
Old 01-27-2016 | 06:36 PM
Patman's Avatar
Global Moderator &
Senior Member
Joined: Aug 2005
Posts: 21,312
Likes: 136
From: DFW
Interesting product. I'd be curious to see this thing first hand from a structural point of view
 
  #25  
Old 01-27-2016 | 06:53 PM
Wookie's Avatar
Senior Member
Joined: Sep 2002
Posts: 2,165
Likes: 3
From: Cabot, AR
That's cool, Coy is a good guy on here.
 
  #26  
Old 01-27-2016 | 06:56 PM
JackandJanet's Avatar
Global Moderator &
Senior Member
Joined: Aug 2007
Posts: 7,819
Likes: 56
From: Among javelinas and scorpions in Zoniestan
Good on ya, Coy! Look forward to your comments.

- Jack
 




All times are GMT -4. The time now is 03:24 AM.