PC 7424..Where To Buy & What Accessories?
#1
PC 7424..Where To Buy & What Accessories?
After much reading I have decided to buy a PC 7424 and tackle these swirl marks on my truck. I figure that I can't make it look anything but better. However, I am very confused (after much reading) as to what pads I need. I bought some light cut made by a company called Hi-Temp. Could those of you in the know please advise (tell me) what pads I should buy, how many of each I should buy, and where to buy them & the PC 7424. I have also read about needing a counter balance. Is this something I need to buy? Take it easy on me guys as not only am I a novice at this( 26 years young), but I am also blond
#2
Coastal Tool www.coastaltool.com for the PC.
and
Premium Auto Care www.pac.com for the pads (Edge 2000 pads)
and
Premium Auto Care www.pac.com for the pads (Edge 2000 pads)
#3
Tami,
First, I think Flareside150 meant this site:
http://www.premiumautocare.com
Here are some quick notes on the PC:
Get at least 2 or 3 polishing pads. (6 1/2" or 7 1/2" pads depending on brand)
Get at least 1 or 2 finishing pads. (6 1/2" or 7 1/2" pads
Dedicate the pads to specific products or very similar products.
Get a 5" hook & loop backing plate.
Use the 6" counter weight that comes with the kit from Coastal (or ask for it wherever you buy it)
Use the polishing pads with light to moderately abrasive polishes with the PC set on 4 to 5.
Use the finishing pads with waxes, sealants or glazes with the PC set on 3 to 4.
If you have more questions, don't hesitate to ask.
P.S. Here's a great forum at MOL to learn more about the PC. (Meguiar's calls the PC a G100
http://www.meguiarsonline.com/forums...php?forumid=67
Here are some other great links to help:
http://www.bettercarcare.com/articles.php?articleId=47
http://forums.roadfly.org/forums/det...1430487&page=1
First, I think Flareside150 meant this site:
http://www.premiumautocare.com
Here are some quick notes on the PC:
Get at least 2 or 3 polishing pads. (6 1/2" or 7 1/2" pads depending on brand)
Get at least 1 or 2 finishing pads. (6 1/2" or 7 1/2" pads
Dedicate the pads to specific products or very similar products.
Get a 5" hook & loop backing plate.
Use the 6" counter weight that comes with the kit from Coastal (or ask for it wherever you buy it)
Use the polishing pads with light to moderately abrasive polishes with the PC set on 4 to 5.
Use the finishing pads with waxes, sealants or glazes with the PC set on 3 to 4.
If you have more questions, don't hesitate to ask.
P.S. Here's a great forum at MOL to learn more about the PC. (Meguiar's calls the PC a G100
http://www.meguiarsonline.com/forums...php?forumid=67
Here are some other great links to help:
http://www.bettercarcare.com/articles.php?articleId=47
http://forums.roadfly.org/forums/det...1430487&page=1
#4
#5
#6
#7
Trending Topics
#8
#9
I've used #21 and loved it! I even posted a thread at meguiarsonline.com of my wife's car before/after. You'll also find a bunch of reviews from other people as well.
It is VERY easy to use. Similar to NXT. Goes on like melted butter and is a breeze to remove. The gloss is great! The only bad thing is it can be hard to see when removing. I actually prefer it to NXT on my wife's black vehicle.
Good Luck!
-slippy
It is VERY easy to use. Similar to NXT. Goes on like melted butter and is a breeze to remove. The gloss is great! The only bad thing is it can be hard to see when removing. I actually prefer it to NXT on my wife's black vehicle.
Good Luck!
-slippy
#10
I tried 21 for the first time today and am actually doing some product comparisons vs. NXT on my hood.
My impressions weren't quite what everyone else has been raving about.
Background:
The weather was sunny and dry/clear. Humidity today was less than 40%.
Application was simple; as I expected. Went on very smooth and even with the MF Even Coat Applicator (a TREMENDOUS product). I applied a VERY thin coat.
Removal was a bit different. It set up for around 10 mins before I got back to removing it. It came off easy but left an 'oily' residue behind. After some elbow grease and a bit of Final Inspection, I got it like I wanted. I'm not positive if this will affect my overall testing or not.
I will say this... it was amazing how much it 'darkened' the paint.
Now, all I have to do is wait it out and see the results. I took a couple of snapshots...
So, the jury is out right now for me. I think I'll like it... we'll see.
RP
My impressions weren't quite what everyone else has been raving about.
Background:
The weather was sunny and dry/clear. Humidity today was less than 40%.
Application was simple; as I expected. Went on very smooth and even with the MF Even Coat Applicator (a TREMENDOUS product). I applied a VERY thin coat.
Removal was a bit different. It set up for around 10 mins before I got back to removing it. It came off easy but left an 'oily' residue behind. After some elbow grease and a bit of Final Inspection, I got it like I wanted. I'm not positive if this will affect my overall testing or not.
I will say this... it was amazing how much it 'darkened' the paint.
Now, all I have to do is wait it out and see the results. I took a couple of snapshots...
So, the jury is out right now for me. I think I'll like it... we'll see.
RP
#13
Originally posted by LINYScrew
Hey RP keep us posted with your impressions, likes, dislikes please. I am interested in this product and would like your take on it.
Joe
Hey RP keep us posted with your impressions, likes, dislikes please. I am interested in this product and would like your take on it.
Joe
Day 2 impressions are about the same as day 1 impressions... I still see a very slight oily look to the paint. Again, Final Inspection was adequate in removing the problem. This was unique to the side being tested with #21. I have read one or two other reviews that were similar to my experiences thus far and I'm optimistic that this problem will cease... I'm still perplexed though.
A few photos...
Side by Side -- Painter's Tape Separation
Here's an interesting one... you'll really have to look closely to see what I describe.
See the two lights on the ceiling (the reflection)? See where the tape was located on the hood? Look very closely at both sides of where the tape was and note, the area where the tape was stuck-on has not been coated with anything. See the darkening of the black paint on both sides?
Both products substantially darken the paint... very impressive to say the least.
RP
#15
Originally posted by Peacemaker
The NXT shows more detail in the reflection IMHO. The ceiling light on the passenger's side of your hood is more focused than the one on the driver's side.
The NXT shows more detail in the reflection IMHO. The ceiling light on the passenger's side of your hood is more focused than the one on the driver's side.