Polishes and Pads
#16
Stuff
Originally Posted by f-150sport03
Why Thank you, Sir.
Hmmm...between the two of us, we might be able to figure out how to tell others about a website...
Hmmm...between the two of us, we might be able to figure out how to tell others about a website...
#17
Originally Posted by FALCON50EX
How long did it take you to gather all your supplies that you have in your gallery? I have heard that there is a second sticky coming out any truth to it.
You dont want what I have (and what many of us have): I have stuff that I thought would be good and it sucked (I was too impatient to wait for a reply on the forums and didnt search...). And, I have a LOT of stuff that is "beginner stuff"-- ie: it is stuff that I would tell somebody who is new at it, like the DC system. If I could use the same amount of $$$ as I did in the long run all at once, I would have a FAR different cache of chemicals and supplies. I would start off with #80 instead of Step 1, etc...
Also, I have a bunch of trial stuff/free stuff that I have accumulated...These are fun to play with sometimes on other people's cars... That's what friends are for, right?
ABOUT THE STICKY:
YES, there will be a revised one (V2.0) coming out...eventually. I am not the one editing it (well, I might change a few things)-- RP is. However, since he is sick and swamped at work right now, he has bigger fish to fry...
SO... Yes, there will be V2 coming out, but have patience Kemosabe.
BTW-- I think we should all wish RP a Get well, after all, he does a LOT for this forum.
#18
Is ADS the only company that u know offering the G100...or PC7424 for that matter..with a lifetime warranty? i think that is a must...there is no question that i am going to get one..i just wanted to see what kind of pads to order...here it goes....
2 orange cutting pads (#80 followed by #9)
1 White pads (the ones with little cut) for glaze
2 Black (??) finishing pads for PB EX-P sealant and Meg's 26
What ya think?
2 orange cutting pads (#80 followed by #9)
1 White pads (the ones with little cut) for glaze
2 Black (??) finishing pads for PB EX-P sealant and Meg's 26
What ya think?
#19
Lake
Originally Posted by stud_135
Is ADS the only company that u know offering the G100...or PC7424 for that matter..with a lifetime warranty? i think that is a must...there is no question that i am going to get one..i just wanted to see what kind of pads to order...here it goes....
2 orange cutting pads (#80 followed by #9)
1 White pads (the ones with little cut) for glaze
2 Black (??) finishing pads for PB EX-P sealant and Meg's 26
What ya think?
2 orange cutting pads (#80 followed by #9)
1 White pads (the ones with little cut) for glaze
2 Black (??) finishing pads for PB EX-P sealant and Meg's 26
What ya think?
#20
I've also become a big fan of the Menzerna polishes. Superior abrasives!!!! Therefore, I would probably go with the IP and the Final Polish.
Like Meguiar's #83, Menzerna Intense Polish can be a little finicky to use with a PC... but it can be done. The Menzerna Final Polish works extremely well with a PC.
IMHO, the 106ff is better suited to a rotary.
Like Meguiar's #83, Menzerna Intense Polish can be a little finicky to use with a PC... but it can be done. The Menzerna Final Polish works extremely well with a PC.
IMHO, the 106ff is better suited to a rotary.
#21
Originally Posted by stud_135
Where did you get that price? I looked at ADS and i was checking out package 2..but i just dont need all of that..but i guess it does come with #80..i just dont want all that NXT stuff
Tic
#24
Originally Posted by Boss_429
I've also become a big fan of the Menzerna polishes. Superior abrasives!!!! Therefore, I would probably go with the IP and the Final Polish.
Like Meguiar's #83, Menzerna Intense Polish can be a little finicky to use with a PC... but it can be done. The Menzerna Final Polish works extremely well with a PC.
IMHO, the 106ff is better suited to a rotary.
Like Meguiar's #83, Menzerna Intense Polish can be a little finicky to use with a PC... but it can be done. The Menzerna Final Polish works extremely well with a PC.
IMHO, the 106ff is better suited to a rotary.
I ahve never used the 106FF with anything but a Rotary .. I will have to play with the DA, and see what I think ..
#25
#26
So how does the quality compare between the 7424 and the G100...ive always been told that they are the same product...just with a different name...and the fact that meg's backing plate cant handle speed 6 makes me want to go for the package from autogeek..here are the two that i am debating on..please help!
http://www.autogeek.net/hk7424.html
or
Package 3 from ADS
http://www.autogeek.net/hk7424.html
or
Package 3 from ADS
#27
Originally Posted by stud_135
So how does the quality compare between the 7424 and the G100...ive always been told that they are the same product...just with a different name...and the fact that meg's backing plate cant handle speed 6 makes me want to go for the package from autogeek..here are the two that i am debating on..please help!
http://www.autogeek.net/hk7424.html
or
Package 3 from ADS
http://www.autogeek.net/hk7424.html
or
Package 3 from ADS
It is the same Machine .. no quality difference.
Buy the G100 from ADS .. call Rick, and ask him to give you the non Meg's backing plate .. should not be an issue
Last edited by Gipraw; 11-06-2007 at 06:00 PM.
#28
Originally Posted by Boss_429
IMHO, the 106ff is better suited to a rotary.
#29
Originally Posted by Gipraw
Sometime in Jan, I believe .. haven't heard a hard date
The new device is to be or has been unveiled at SEMA. It looks disappointing but I'll withold total judgement just yet.
Thanks for the well-wishes guys. Last week it was a stomach bug (and I won't describe the effects of that here) and this week it's strep coupled with a sinus infection.
I'd like to publically thank my little 4-month old for bringing home such nice bacteria and viruses from daycare to her daddy. It really means a lot to know that she's thinking about me enough to bring me gifts...
-RP-
#30
Originally Posted by Gipraw
It is the same Machine .. no quality difference.
Buy the G100 from ADS .. call Rick, and ask him to give you the non Meg's backing plate .. should not be an issue
Buy the G100 from ADS .. call Rick, and ask him to give you the non Meg's backing plate .. should not be an issue
Be sure to mention that the fine folks at f150online.com sent you his way!
-RP-