Niceeeeeeeeeeeeee!

 

I want to buy some today but I have a question. Once you guys dilute the HD what are you putting it in. I hope Im making sense. What are you guys pouring the HD into along with the water. Did you purchase a separate spray bottle or pour bottle or something else?

 

Ya i just purchased a hd spray bottle from them it has pre marked measuring lines for the amount of water to add and then you just top it off with the hd makes if very simple and hassle free.

 

Im going to buy a gallon but how do I know how much of the HD to use. That's where im lost. Im lost as to how much HD to use and what to purchase to measure the water to HD ratio.

 

spray bottles

The link will take you to the bottles just find the hyper-dressing one. The ratios all refer to water level:hyperdressing level. So if its 4:1 its 4 parts water 1 part hd and so on. Hope this helps. Oh and if you do order the bottles the sprayers are not included.

 

The HD secondary bottle (Meguiar's part D-20170) has markings (graduated) on the side of the bottle that indicate to what level to fill. Honestly, they make most all of the D-Line of products easy to dilute (as most are concentrated).

So, long story short, it's far from rocket science... go with a HD secondary bottle for simplicity but, if you can't get your paws on one, simply remember that it's 1 part water to 1 part HD for a High Shine or 4 parts water to 1 part HD for matte shine. You can figure out the middle of the road dilutions from that...

4:1 = 4 parts water to 1 part HD. So, in a 32 ounce bottle, you'd have about 25 ounces of water with about 7 ounces of HD.

1:1 = 1 part water to 1 part HD. So, in a 32 ounce bottle, you'd have around 16 oz water and 16 oz HD.

Get the picture?



-RP-

 

Man, where would we be without RockPick!

 

Tell me about it. Thanks to every one who chimed in.

 

I love HD !!