The way black paint should look
#17
Black Hole is a nice product. It adds some depth and wetness to the paint. Also, as is the case with most PB products, application and removal is a snap.
#18
I'd say I probably had 8+ hours in on this one. Do yourself a favor and get some EX-P. It's a pure sealant with a short cure time.
Between the PB glazes and DWG I'd say you'd have a hard time telling the difference. Application and removal are similar, and the results are similar. Very good products.
#20
#21
#23
The exterior trim got PBs Trim Restorer. It does a nice job, but I think this truck is gonna need something a little more serious next time.
#24
i used pretty much what you did and still didn't remove all the swirls.
ssr2.5 + orange
ssr1 + green
PP + white
BH + black
EXP + blue
nattys blue by hand
i kept working sections until the product seemed to turn translucent and minor dusting was present. speed on the DA for the corrective steps was 4.5. any tips?
trucks looks great, btw.
ssr2.5 + orange
ssr1 + green
PP + white
BH + black
EXP + blue
nattys blue by hand
i kept working sections until the product seemed to turn translucent and minor dusting was present. speed on the DA for the corrective steps was 4.5. any tips?
trucks looks great, btw.
#25