New 2009 Meguiars products Announced
#1
New 2009 Meguiars products Announced
Just a heads up Megs just revealed their 2009 line. Some notable changes are new formulation M105 now officially DA approved., New M205 (Mike Phillips raved about this product a couple of weeks ago when I was at Megs advanced class). Scratch X 2.0.
Major difference is in technology. Previous compounds had to be broken down for a swirl free finish. New technology is micro abrasive that does not break down. Check the Megs site for a better description.
I am curious to try the M205.
Major difference is in technology. Previous compounds had to be broken down for a swirl free finish. New technology is micro abrasive that does not break down. Check the Megs site for a better description.
I am curious to try the M205.
#3
#5
#6
#7
Trending Topics
#8
One of the best products Megs has put out. some say it was a product made by accident...it can be used by hand or my machine,
It finishes well....pending how you do use it, you could top it with your fav LSP after using it.
yes that is my tail gate...it took a beating over the past 90 days...
to this
Poor examples but let me tell you it takes a ton to impress me but this is a great product.
Don't just listen to me, several members at TDC also rave about its capabilities.
Last edited by RollingRock; 11-05-2008 at 12:53 AM.
#10
That said
Wash
Dry
Clay (Proper prep is always key)
M105
The next steps are dependant on what mechanimism you use...there are many factors here. By hand, machine? If by machine, pad product combo? Level of correction etc.
Next steps after M105
Its possible to go right to LSP or
Seal then LSP
or
Burnish then seal then LSP
Lots of options can be used with M105...but also there are many what if factors in play.
just giving you my .02
#11
There is quite a bit of conversation on megs online about differences and applications etc...
#12
It is a correction product and I would only use it for moderate or severe micro marring etc.
That said
Wash
Dry
Clay (Proper prep is always key)
M105
The next steps are dependant on what mechanimism you use...there are many factors here. By hand, machine? If by machine, pad product combo? Level of correction etc.
Next steps after M105
Its possible to go right to LSP or
Seal then LSP
or
Burnish then seal then LSP
Lots of options can be used with M105...but also there are many what if factors in play.
just giving you my .02
That said
Wash
Dry
Clay (Proper prep is always key)
M105
The next steps are dependant on what mechanimism you use...there are many factors here. By hand, machine? If by machine, pad product combo? Level of correction etc.
Next steps after M105
Its possible to go right to LSP or
Seal then LSP
or
Burnish then seal then LSP
Lots of options can be used with M105...but also there are many what if factors in play.
just giving you my .02
Would you say the this is similar to there new Swirl X product and can this product be used my hand?
#14
One of the best products Megs has put out. some say it was a product made by accident...it can be used by hand or my machine,
It finishes well....pending how you do use it, you could top it with your fav LSP after using it.
yes that is my tail gate...it took a beating over the past 90 days...
to this
Poor examples but let me tell you it takes a ton to impress me but this is a great product.
Don't just listen to me, several members at TDC also rave about its capabilities.
#15
I'll throw my .02 in there for 105. I used it for the first time on my severely neglected roof of my Expedition. I used a 4" orangle pad on a 7424 and got amazing results. It still needs a bit of work, but the difference it made in one pass was almost LSP ready. I had just run out of time and light.