Autolamp feature not working
#1
07-26-2004 | 02:24 PM
Thread Starter
|
Junior Member
Joined: Jul 2004
Posts: 1
Likes: 0
From: Beaverton, OR
Autolamp feature not working
#3
08-25-2004 | 12:57 PM
Certified Goat Breeder
Joined: Feb 1999
Posts: 6,181
Likes: 14
From: the moral high ground
Autolamp Testing Procedure
1) Engage Autolamp switch to 'On'.
2) Open Owners Manual to page....(nevermind don't open it).
3) Place Owners Manual on top of Autolamp sensor grid located on dash.
4) Wait seven seconds, Headlights will come on.
5) If Headlights do not come on, drive to dealership (during daylight). Remove Owners Manual from dash, approach salesman, use Owners Manual to strike salesman about the head and shoulders repeatedly.
1) Engage Autolamp switch to 'On'.
2) Open Owners Manual to page....(nevermind don't open it).
3) Place Owners Manual on top of Autolamp sensor grid located on dash.
4) Wait seven seconds, Headlights will come on.
5) If Headlights do not come on, drive to dealership (during daylight). Remove Owners Manual from dash, approach salesman, use Owners Manual to strike salesman about the head and shoulders repeatedly.
#6
08-26-2004 | 02:58 AM
Senior Member
Joined: Mar 2004
Posts: 539
Likes: 0
From: NS, Canada
Re: Autolamp feature not working
Originally posted by Mallet
I have a 2000 Expedition Eddie Bauer and the Autolamp feature isn't working. I put the headlight swith into the Autolamp position but nothing happens. Got any ideas?
I have a 2000 Expedition Eddie Bauer and the Autolamp feature isn't working. I put the headlight swith into the Autolamp position but nothing happens. Got any ideas?
