I am not quite sure where the best place for the pipe hangars is...I have all the clamps and hangars that come with a Dynomax Super Turbo catback system, but this is my first time installing exhaust myself and I have looked for good photos of others - but I cannot seem to find any. BTW my system did not come with any instructions, just pipes, muffler and hangars/bracket. the bracket that I think is for the muffler is a homemade job I got from A-1performance.com. It is a clamp welded to a steel rod. The steel rod is about 3/8" in diameter and 8-10" in length. Any help or pics would be greatly appreciated. email me rcw44@yahoo.com if you can.
Thanks

------------------
2000 F150 4x4 Lariat SuperCab
5.4L V8, ORP, Tow Pkg, Lthr Captain Chairs
Plain Black w/o trim color
Mobile 1 synthetic user

Mods so far:
-SuperChip from Mike T. (Best $225 ever spent!!!)
-Clear front corner lenses
-Carr Polaris step nerf bars (stainless steel)
-20% tint (drivers/passgrs windows to match factory tint)
-United Welding Service solidlid toolbox w/rails
-Hard wired radar detector
-Herculiner (love it)
-Huskyliners and Bull Rings
-NO MUFFLER, NO PIPES, for now

 

What part# was it? I got my system from A-1 also. It was an Ultra-flow #16132. When it arrived it was a #17338 Super Turbo system, that they had opened and changed the muffler only. It had the hangers welded to the rear tailpipe section in the factory locations, for both factory hangers. The double hanger behind the muffler was welded 5" behind the muffler on the tailpipe.

------------------
2000 F-150 XL,RC,LB,5.4,4R70W,3.55LS,
Class III tow/Payload #3/Convenience pkgs.,
4-wheel disc/ABS,Chestnut/Parchment 40/60,
Ford bedliner & gas/wheel/spare locks,
3" cold air box modification, Superchip,
Dynomax ultra-flow welded 3" cat-back,
3" exit Y-pipe, Hellwig rear anti-sway bar,
Rancho RS9000s.

 

Sounds like my problem is that I didn't order the entire system from A-1 because I found it cheaper at Pep Boys - anyway, it sound like I have some welding to do...

Does anyone have any pics of modified exhaust and hangars and bracket locations on the board? I thought I saw some good ones somewhere but now I cannot find them..