dual rectangle exhaust

Thread Tools
 
Search this Thread
 
  #1  
Old 03-14-2005 | 10:30 PM
holdemplayer's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2005
Posts: 4
Likes: 0
dual rectangle exhaust

i dont know much about exhaust systems but are there any with dual rectangular tips out the back? my friend has dual tips out to the side on his 97 ext cab. and i would like the rectangular tips on my 04 ext cab to accent the square bed. yeah so if someone could help me it would be appreciated, and i dont even know if they exist ive never seen em but id like to own some.


Thanks

Tommy
 
  #2  
Old 03-15-2005 | 02:59 AM
Faster150's Avatar
Senior Member
Joined: Jan 2005
Posts: 5,389
Likes: 0
From: Fort Worth,Tx
yeh they call em nascar style tips the Nascar edition F150's had em. but u can just look up and find some tips off a camaro
 
  #3  
Old 03-15-2005 | 10:03 AM
seemlessstate's Avatar
Member
Joined: Jan 2005
Posts: 24
Likes: 0
From: florida keys
i made mine out of 4 inch stainless pipe and just beat them until i liked the shape. ive got two of them coming out of a custom y pipe i welded up in front of my passenger wheel.

i like the way they look. sort of a hot rod feel to them.

oh i ground them down and had them chromed so it dosnt look like i did it with a hammer.

you could try that but there are plced to buy them. i think jegs has them. but i didnt like the shape of theirs so i made my own
 
  #4  
Old 03-15-2005 | 10:10 AM
max mitchell's Avatar
Senior Member
Joined: May 2000
Posts: 4,761
Likes: 0
Not any Camaro...a late 90s Z-28.
 
  #5  
Old 03-15-2005 | 01:41 PM
racerf150man's Avatar
Senior Member
Joined: Nov 2004
Posts: 526
Likes: 0
From: minnesota
i remember seeing them for pretty cheap in a magazine. i dont remember which one but it was one of these three.... summit, truckperformance.com, or jcwhitney. just plz dont buy the one that says bad bowtie on it... ha
 
  #6  
Old 03-16-2005 | 02:02 PM
holdemplayer's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2005
Posts: 4
Likes: 0
????????

I didnt see any at those places
 
  #7  
Old 03-16-2005 | 02:43 PM
racerf150man's Avatar
Senior Member
Joined: Nov 2004
Posts: 526
Likes: 0
From: minnesota
  #8  
Old 03-17-2005 | 10:58 AM
KC-10 FE's Avatar
Senior Member
Joined: Dec 2004
Posts: 462
Likes: 0
From:
If you want to exit out the side, then this is what your looking for, in a simple bolt on system. If you want the rectangle to go out under the bumper, go to any auto parts store and you should be able to pick up tips from a 93-03 Camaro for about $40 each. You would then have to install some sort of dual exhaust.

Hope this helps.

http://www.gibsonperformance.com/pro...&make=25#parts

KC-10 FE out...
 

Last edited by KC-10 FE; 03-17-2005 at 11:04 AM.



Quick Reply: dual rectangle exhaust



All times are GMT -4. The time now is 06:07 AM.