stock intake mods... it works!!!
#16
Originally Posted by jfox
If I cut off all four of my converters and put on two hi flow converters and a catback exsuast system, will I get any computer cods, will it really inprove my performance on a 00 -150 5.4 v8 is it leagle to cut off the catolic converters. I did go to a muffler shop to have the work done, and I was told they wehre not leagley allowed to take the converters off, but would do it for me. It was going to cost me about $800.00 to have it done. Does that sound about right?
#17
#18
Originally Posted by BIGDAVE128
i read an article on this web site tellin me how to modify my stock air intake by taking out the silencer... and i will be the first to back them up in saying it works!! not in the way of hp but i can tell a difference n throttle response and mpg... most of the time ill get bout 330 mile to a full tank... but as of now i have 358 and i still have bout an 8th of a tank left... i would recommend this mod!
#19
Is this the one your looking for don??
https://www.f150online.com/tech/airbox.html
edit that is a dif air filter mod^^^^^^
https://www.f150online.com/tech/airbox.html
edit that is a dif air filter mod^^^^^^
Last edited by Kevin24; 08-16-2007 at 05:44 PM.
#20
#21
Originally Posted by dondiesel444
Kevin, yea I've already tried that one, thanks.
I'd like to know about what these other guys are talking about. I reached my hand in the air filter side of the "L" tube but didn't feel anything I could remove....
I'd like to know about what these other guys are talking about. I reached my hand in the air filter side of the "L" tube but didn't feel anything I could remove....
#23
Originally Posted by Budha05STX
https://www.f150online.com/forums/se...archid=1201340
https://www.f150online.com/forums/sh...ntake+silencer
That narrowed it down!
To MGD & Kevin, thank you for your help
Last edited by MiamiDave; 08-19-2007 at 12:09 AM.
#24
Heck with all that silencer garbage , you guys didn't find the good thread did yuh ???
Here's a pic from it -
Fricken A , heres another -
LOOK!!! What an ugly a$$ color green!!!
If you take one more Fernco like Gott's did and put her on the end of the housing with a piece of 3" schedual 40, it will fit thru the fender converting everything into cold air ..
What a kickarse system that will be..( :
Here's a pic from it -
Fricken A , heres another -
LOOK!!! What an ugly a$$ color green!!!
If you take one more Fernco like Gott's did and put her on the end of the housing with a piece of 3" schedual 40, it will fit thru the fender converting everything into cold air ..
What a kickarse system that will be..( :
Last edited by jbrew; 08-19-2007 at 04:48 AM.
#25
#26
Actually , I made a badder one since lol - Well , it's almost done I should say , I made a couple box type cold air units for the end , not happy with it yet lol.. I finally finished painting the truck though - I'm not doing that again, I've had it with body work - my rockers where shot towards the front - I had to cut em out.. - not fun!!..
I'll show yuh some before and after shots if you wanna checkit out, it turned out decent for the most part.. - Email me..
Hey, you get your freakin tune yet?
I'll show yuh some before and after shots if you wanna checkit out, it turned out decent for the most part.. - Email me..
Hey, you get your freakin tune yet?
Last edited by jbrew; 08-19-2007 at 06:22 AM.
#28
#29
I like it seriously !! I didn't think of doing that.. I'm going to give a go since I already have the chit
I sold this one , but have another that I'm going to stick in the housing with that 3" attachment like you did for now.
I made boxes from rubbermaid trash cans from home depot that fit perfect in the corner. I need to get to the salvage yard and pick up some of that door rubber for the tops..
I sold this one , but have another that I'm going to stick in the housing with that 3" attachment like you did for now.
I made boxes from rubbermaid trash cans from home depot that fit perfect in the corner. I need to get to the salvage yard and pick up some of that door rubber for the tops..
Last edited by jbrew; 08-19-2007 at 11:10 PM.
#30
Originally Posted by jbrew
I like it seriously !! I didn't think of doing that.. I'm going to give a go since I already have the chit
I sold this one , but have another that I'm going to stick in the housing with that 3" attachment like you did for now.
I sold this one , but have another that I'm going to stick in the housing with that 3" attachment like you did for now.