Where to get an X or H pipe
#1
Where to get an X or H pipe
Hi I was looking for a H pipe or X pipe for my 2001 Expedition Eb 5.4L. I wanted to get one like they make for the Mustangs like the ones summitracing sells. I wanted to get a true one with no cats no to concerned about back psi as i will be puting a powerdyne SC with 6psi. and maybe up to 9psi. any help Thanks guys HAY SOME THING NEW does any one no what FPDM fuel pump driver module i should use and wheere to get it its for the expo 5.4L W Canda model 14 count on the valve cover.
Last edited by nonwoven29; 02-19-2009 at 12:08 PM.
#2
Trucks exhaust is much different than a Mustangs exhaust. The left bank is guided over to the passenger, so the X pipe for trucks has nothing to do with the cats.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
#3
x pipe it dont get a H pipe i only got a H pipe cuz i was 2 cheap to get a x
just go with this one, if my straights start to get on my nerves and get me into to much trouble i might get one to quieten it down a little \
http://cgi.ebay.com/ebaymotors/T304-...Q5fCarQ5fParts
just go with this one, if my straights start to get on my nerves and get me into to much trouble i might get one to quieten it down a little \
http://cgi.ebay.com/ebaymotors/T304-...Q5fCarQ5fParts
#7
NARROW X PIPES
X-pipe with inlets and outlets that are parallel. Designed mostly for late model pickups where the exhaust is routed down one side of the drive shaft, or where there are space limitations. Made of 16 gauge aluminized mandrel bent tubing.
X-pipe with inlets and outlets that are parallel. Designed mostly for late model pickups where the exhaust is routed down one side of the drive shaft, or where there are space limitations. Made of 16 gauge aluminized mandrel bent tubing.