Need some exhaust help!

Thread Tools
 
Search this Thread
 
  #1  
Old 01-01-2009 | 02:01 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Need some exhaust help!

Ok Here's my question. I'm planning on purchasing two single inlet single outlet Flowmaster super 44's and dumping them before the rear axle. Low end torque isn't a problem with me as I haven't noticed a loss with my true dual strait's. I will be using 2.5" pipe since that's what I currently have installed. I also have an X pipe but I doubt i'll reuse it since it quieted my strait's down more than I preferred. I also have my rear cat's removed so I think it will sound badass. What does everyone think about this setup? Does anyone already have a sound clip of a similar setup? I already tried the search function but it brought up crap about 44 inch tire's and other crap unrelated to what I was looking for. Thanks!
 
  #2  
Old 01-01-2009 | 03:19 PM
openclasspro#11's Avatar
Senior Member
Joined: Aug 2004
Posts: 2,824
Likes: 0
From: North Huntingdon,Pa.
if you were to put magnaflows on there -you'd be surprised by the torque you lost going dual straight, you got used to it
 
  #3  
Old 01-01-2009 | 03:33 PM
f150fella08's Avatar
Senior Member
Joined: Feb 2008
Posts: 4,637
Likes: 2
From: Pittsburg, Texas
sounds great to me!!! just get a sound clip up as there arent any 5.4 3v true dual super 44 sound clips yet, , not that ive found anyways
 
  #4  
Old 01-01-2009 | 03:43 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Originally Posted by openclasspro#11
if you were to put magnaflows on there -you'd be surprised by the torque you lost going dual straight, you got used to it
I was debating on the idea of using an 11" magnaflow DI/DO muffler and dumping it off after the muffler or using two SI/SO 11" maggies true dualed dumped. I'm sure I did lose some low end torque but I don't pull a trailer very often so I guess that's why I haven't noticed a loss.
 
  #5  
Old 01-01-2009 | 03:45 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Originally Posted by f150fella08
sounds great to me!!! just get a sound clip up as there arent any 5.4 3v true dual super 44 sound clips yet, , not that ive found anyways
I haven't found any either. The search function is a joke anyway's. It's useless when you search Flowmaster Super 44 and it pull's up thread's about 44 inch tire's.
 
  #6  
Old 01-01-2009 | 03:56 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Nevermind on the idea I just posted. I found a sound clip of Joshmac4.6's exhaust and it has completely changed my mind. His exhaust sound's sweet. An 11" Maggie with my 4x18" tip's are what i'm gonna use ran out lightning style with the tip's turned on the side.
 
  #7  
Old 01-01-2009 | 04:00 PM
f150fella08's Avatar
Senior Member
Joined: Feb 2008
Posts: 4,637
Likes: 2
From: Pittsburg, Texas
Originally Posted by 2004Triton5.4
Nevermind on the idea I just posted. I found a sound clip of Joshmac4.6's exhaust and it has completely changed my mind. His exhaust sound's sweet. An 11" Maggie with my 4x18" tip's are what i'm gonna use ran out lightning style with the tip's turned on the side.
yea had got the style before yours, 4.6 motor with just the pre cats, he had the rears cut off, i think he might have a X pipe dont really know for sure,

i now one thing he's been gone for a while lol havent seen a post from him in a few months
 
  #8  
Old 01-02-2009 | 01:58 PM
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 4
From: Mansfield, P.A.
Originally Posted by 2004Triton5.4
Nevermind on the idea I just posted. I found a sound clip of Joshmac4.6's exhaust and it has completely changed my mind. His exhaust sound's sweet. An 11" Maggie with my 4x18" tip's are what i'm gonna use ran out lightning style with the tip's turned on the side.
Well Joshmac has the 14" rounds, not 11". I got the 11s though, which you've heard my exhaust many of times before. Its a little louder now. Almost sounds like straights under WOT, my friend drove it down the road for me, yeah my Magnaflows certainly are not quiet lol.

I was planning Super 44s this spring, might pop them on for the summer ( or until they fail ) and put my 11s back in, so either way we'll know eventually.
 
  #9  
Old 01-02-2009 | 05:40 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Yea I knew he had the 14". Where did you purchase the 11" from? The only one I can find is the 14" Maggie. I might just get the 14" since I wanna keep the exhaust from getting very raspy at high rev's.
 
  #10  
Old 01-02-2009 | 07:52 PM
4wd150's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,108
Likes: 0
From: New Jersey
summitracing has them i believe
 
  #11  
Old 01-03-2009 | 07:47 AM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

Ok thanks!
 
  #12  
Old 01-03-2009 | 12:12 PM
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 4
From: Mansfield, P.A.
Yep Summit is where I buy a majority of my vehicle components from.

http://store.summitracing.com/partde...5&autoview=sku
 
  #13  
Old 01-03-2009 | 04:10 PM
2004Triton5.4's Avatar
Thread Starter
|
Technical Article Contributor
Joined: Dec 2007
Posts: 972
Likes: 0
From: Louisiana

I'm starting to feel like a retard. Does magnaflow offer the 11" muffler with a center inlet and center outlet? The only muffler i've found so far with the center inlet and outlet is the 14" muffler.
 
  #14  
Old 01-03-2009 | 08:34 PM
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 4
From: Mansfield, P.A.
Originally Posted by 2004Triton5.4
I'm starting to feel like a retard. Does magnaflow offer the 11" muffler with a center inlet and center outlet? The only muffler i've found so far with the center inlet and outlet is the 14" muffler.
Nope, the 11" is available in C/O, O/O Directly ( offset on both ends in a straight direct design ), and DI/DO.

The quickest way to Identify the 11" body is the first two numbers in the part # is 11.
 
  #15  
Old 01-03-2009 | 09:30 PM
06' Ford's Avatar
Senior Member
Truck of the Month
Joined: Jan 2009
Posts: 363
Likes: 0
From: Okeechobee, Fl
Here's my friends truck with a 5.4 with flowmasters coming out in front of his rear tires.
http://s271.photobucket.com/albums/j...urrent=002.flv
 

Last edited by 06' Ford; 01-03-2009 at 09:33 PM.


Quick Reply: Need some exhaust help!



All times are GMT -4. The time now is 01:24 PM.