whats the loudest exhaust(that is still legal) that u have? pics? where u get it? price?

 

I'm running true duals 2.5" no mufflers. It's legal in Alabama. Not sure about what your state regulations are. It would basically be about 120-150 for pipe, and whatever the cost of the tips you choose are. I'll try to snap some pictures of my setup tomorrow for you though. So For me it would be about 240-260.

 

i had true dual 94106 hi flows and 2 single chamber 10 series flowmasters with a h pipe and it was pretty loud and still legal

 

whats the laws in missouri on exhaust?

 

No real laws in my area... I have long tubes, no cats, bassani mufflers turned down... not too bad but LOUD at WOT

 

yeah. i didnt know if there were emissions over there or not. i know in illinois we have emissions in spots, but i dont so ive got true dual 2.5'' pipes with 4'' tips

 

my exhaust is pretty loud as well...long tube headers true duals no cats and thrush chambered mufflers..all 3 in piping...

 

same set up as boss only dual dynomax bullets. and i have open cut-outs so when i feel the need to be very illgeal i open them and it dont get louder than that....well 8 open pipes or open heads....but open 3 inch cut-outs dont get much louder than that. i got an old video of my truck shorty headers with down pipe no mufflers or cats sounds awesome

 

im running stock manifolds with no cats and 3" true duals with an x pipe dual 40 series flows and 4 inch tips cali style behind the rear wheels. its very loud.

 

The loudest exhaust you can run is no exhaust what so ever, open headers! They're not legal and can cause engine damage, but it's loud as hell!

 

actually i think headers with 3" pipe all the way back no cats or mufflers is louder than just open headers

either way its freakin loud

 

you mean like this?

http://www.fquick.com/videos/viewvideo.php?id=3591

 

Loudest legal imo would be hi-flow cats, true duals without cross over, Dynomax Bullets dumped.

 

loudest or loudest that sounds good?

loudest "muffler" would be the dynomax bullet or the SLP loudmouth 1

 

i have obx stainless LT's with resonators, to some rather large glasspacks which i hope to get enough time off to replace with home built glasspacks. i decided on 4x10" with 2.5ix3o, duals with complete stainless construction, even the packing will be stainless steel wool. that setup will be loud, probably illegal here since the law is if it can be heard at 25 ft away.

the loudest thing ive ever heard from a DD pavement pounder is my truck, LT's with resonators on the back of the LT's. it was loud enough cars passed me and it was a deafening roar. needless to say there was a cop there in 5 mins.