New Custom Exhuast

Thread Tools
 
Search this Thread
 
  #1  
Old 08-24-2009 | 03:33 PM
OnAF150High's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 63
Likes: 0
From: NJ
New Custom Exhuast

Hey everyone,

I just want to pass on to everyone what I had done to my truck. Almost 2 years ago my father gave me His 99 F150 as a gift. He had installed 5 years prior a custom exhuast that was a single in dual out that exited behind the rear tires. In May one of the welds broke that held the driver side tip and a short section of pipe on. When we went to fix it we noticed that not only was the driver side tip section weld broken, but the section going over the axle on the passenger side was rotted out badly. We repaired it as best as we could until I was able to go to his house in Western PA to take the truck back to the same exhuast shop for a new exhuast system. What I had put on to replace the old system was a 3inch inlet to dual 2 1/2 inch out let pro flow muffler with dual 3 1/2 inch chrome tips 45 degree angle cut. I wanted the tips angle to line up with the bodylines of my truck. The dual tips exit 99 lightning style(infront of the passengers side rear tire). The sound is a good bit more aggressive that the old system was. I feel for people on the right side of me LOL. Pictures to come soon. Later everyone.

Andrew
 
  #2  
Old 08-24-2009 | 04:03 PM
warhammer44's Avatar
Senior Member
Joined: Dec 2008
Posts: 170
Likes: 0
From: Fort Scott, KS
pointless post
 
  #3  
Old 08-24-2009 | 08:25 PM
OnAF150High's Avatar
Thread Starter
|
Member
Joined: Sep 2006
Posts: 63
Likes: 0
From: NJ
here are the pictures.






 

Last edited by OnAF150High; 08-24-2009 at 08:37 PM.
  #4  
Old 08-25-2009 | 12:17 AM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
Looks good
 



Quick Reply: New Custom Exhuast



All times are GMT -4. The time now is 10:14 PM.