My OBX header install.
#1
#2
Ok so who knows the best way to get out that broken header bolt?
I tried a vice grips but that didn't work.
I know they have some kind of tools out there built just for getting out broken bolts but I don't have any experience with them.
Any idea's?
oh and by the way, there is about 1/2" of the bolt sticking out from the block.
I tried a vice grips but that didn't work.
I know they have some kind of tools out there built just for getting out broken bolts but I don't have any experience with them.
Any idea's?
oh and by the way, there is about 1/2" of the bolt sticking out from the block.
#4
I have always heard from guy's on here to let them soak for a few days but like I said I got a little antsy.
After the first one broke I took a hammer and tapped on the others before trying to remove them. I'm not sure if that helped or if it was just tha the PB Blaster had more time to do it's thing.
#5
Oh yea, Another thing that I forgot about.
What did you guy's do with the dip stick tube on the passengers side?
It looks like if I can get it out of the block at the bottom, I could re install it after the headers are on but I couldn't figure out how to get it out of the block at midnight last night.
I don't want to have to drop the oil pan just to figure out how to get the dip stick tube out.
What did you guy's do with the dip stick tube on the passengers side?
It looks like if I can get it out of the block at the bottom, I could re install it after the headers are on but I couldn't figure out how to get it out of the block at midnight last night.
I don't want to have to drop the oil pan just to figure out how to get the dip stick tube out.
#6
Do you have enough room to get a drill on that broken bolt? If so buy some easy outs and drill a pilot hole to the right size and try a easy out. They have been a life saver to me at work. If you cant afford them try and find a mechanic buddy and see if you can borrow one of his. I think I paid about $200 for mine on the snap on truck, but that was with left hand bits also.
Just make sure to soak it with a good penetrating oil.
Here is what im talking about in case your not familiar with them.
http://buy1.snapon.com/catalog/item....re&dir=catalog
Just make sure to soak it with a good penetrating oil.
Here is what im talking about in case your not familiar with them.
http://buy1.snapon.com/catalog/item....re&dir=catalog
Last edited by rabbit hunter; 08-25-2009 at 11:17 AM. Reason: Website
#7
Trending Topics
#10
#11
#13
Yeah it just pulls right out, might have to wiggle it a bit, mine came out rather easy. Vice grips didn't work? Thats what I used on most of my studs after soaking em, just enough to get em loose and did the rest by fingers. Just curious as to how long did it take to get both manifolds out, cause that passenger side was a major PITA... Good luck with the rest of the install.
#14
Yeah it just pulls right out, might have to wiggle it a bit, mine came out rather easy. Vice grips didn't work? Thats what I used on most of my studs after soaking em, just enough to get em loose and did the rest by fingers. Just curious as to how long did it take to get both manifolds out, cause that passenger side was a major PITA... Good luck with the rest of the install.
I have a body lift which looked like it helped quite a bit. Both sides came out really easy, I thought, compared to what most people say.
All except for the broken stud that is.
#15