OBX LT do not fit HELP!
#1
OBX LT do not fit HELP!
I got a set of the OBX headers which I bought here. And as you can see they are suppose to fit a 4wd application but they do not because the driver side header hits the front drive shaft before being able to put the bolts on.
So basically what I came up with. It's that the kit I bought is a knock-off from the pacesetter's not the Dynatech and they only fit 2WD.
So my question here is:
Will the OBX LT's that are the Dynatech knock-off's are going to fit my 2006 Ford F-150 4X4 with a 6'' lift kit.
Here is what I'm looking to get.
So basically what I came up with. It's that the kit I bought is a knock-off from the pacesetter's not the Dynatech and they only fit 2WD.
So my question here is:
Will the OBX LT's that are the Dynatech knock-off's are going to fit my 2006 Ford F-150 4X4 with a 6'' lift kit.
Here is what I'm looking to get.
#2
#5
The header itself is hitting the driveshaft check this out:
As far as the other kit goes, I just called Troyer to see if the Dynatech's would suit my application and it will.
So it looks like I should of researched a little bit more! I'm going to order the other OBX kit and hopefully I can get them overnight because the truck is on the lift right now.
As far as the other kit goes, I just called Troyer to see if the Dynatech's would suit my application and it will.
So it looks like I should of researched a little bit more! I'm going to order the other OBX kit and hopefully I can get them overnight because the truck is on the lift right now.
#7
Trending Topics
#9
So I called a couple places and I finally got some answers: it looks like the H10971 kit I bought has been replaced for the H11455 kit because of fitment issues! So I just got screwed BIG TIME! I'm buying the H11455 fit which should fit perfectly on any 2WD and 4WD whether its lowered or lifted or stock.
@NOLAGT --> My advice don't buy the cheap kit from eBay.
@NOLAGT --> My advice don't buy the cheap kit from eBay.
#10
I run the OBX kit for the harley / lightning edition truck.
http://cgi.ebay.com/ebaymotors/OBX-H...Q5fAccessories
No clearance issues on my SAS truck, or when it was a 6" fabtech.
http://cgi.ebay.com/ebaymotors/OBX-H...Q5fAccessories
No clearance issues on my SAS truck, or when it was a 6" fabtech.
#13