where to get "y" pipe installed?
#1
07-16-2001 | 12:07 PM
Thread Starter
|
Member
Joined: Aug 2000
Posts: 77
Likes: 0
From: Novi and Kalamazoo, Michigan
where to get "y" pipe installed?
This question is for anyone that has had a flowmaster y pipe collector installed. I am undecided as to where I should go to have it installed. Are there any national chains that are good, like Midas. Thanks in advance.
Bennett
Bennett
Last edited by bennett399; 07-16-2001 at 12:18 PM.
#3
07-16-2001 | 09:34 PM
Member
Joined: Nov 2000
Posts: 93
Likes: 0
From: w.paterson NJ
I went to a Meineke shop that was recomended to me.
I told the guy what I wanted & WE did the job. The guy was nice enuff to let me help. LOL
Great job done. I now have the "Y" welded in place.
I cut apart the pipe we removed & the measurment of the oval hole is 2 x 1 1/2 inches. This was going into a Gibson exhast.
$65.00 & I threw the guy a 20..
It was worth it .
I told the guy what I wanted & WE did the job. The guy was nice enuff to let me help. LOL
Great job done. I now have the "Y" welded in place.
I cut apart the pipe we removed & the measurment of the oval hole is 2 x 1 1/2 inches. This was going into a Gibson exhast.
$65.00 & I threw the guy a 20..
It was worth it .