Hellwig sway bars for 250LD/ F150 (7700 pkg.)?
#1
Hellwig sway bars for 250LD/ F150 (7700 pkg.)?
Has anyone installed rear sway bars on a "Light Duty?" I'm having trouble finding a part number, but not sure if it's the same as the F150's with the smaller rearend.
------------------
1999 F250 LD S/C XLT 4x4
5.4L, 3.73, 4R100 trans.
Flowmaster 40 "DF" series, K&N, Superchip, WMS Velocity Tube, Rancho RSX shocks, Stull billet grille, 2-PIAA Pro80XT's (120W), 2-KC Daylighters (150W). 265/70 R17 BFG AT KO's on 17x8 American Racing Atlas rims
Kenwood 7007 CD, Alpine 3342 Signal Processor, Alpine MRV-F353 5Ch. Amp, Pioneer TS-A6865 3-way speakers, MTX Thunderforms. CompuStar alarm/autostart.
------------------
1999 F250 LD S/C XLT 4x4
5.4L, 3.73, 4R100 trans.
Flowmaster 40 "DF" series, K&N, Superchip, WMS Velocity Tube, Rancho RSX shocks, Stull billet grille, 2-PIAA Pro80XT's (120W), 2-KC Daylighters (150W). 265/70 R17 BFG AT KO's on 17x8 American Racing Atlas rims
Kenwood 7007 CD, Alpine 3342 Signal Processor, Alpine MRV-F353 5Ch. Amp, Pioneer TS-A6865 3-way speakers, MTX Thunderforms. CompuStar alarm/autostart.
#2
Hey Jupiter!
I installed the F150 Helliwig sway-bar on my 7700. I had to turn it upside down so it would clear. It bolts up just the same and it makes a big difference. Almost eliminates body roll in the corners. Very stable.
Still can't find wheels for my truck. Thanks again for the pics.
------------------
2000 XLT supercab, 4x4 7700lb. package, 5.4L, 3.73 LS,skids,CD changer,MagnaCharger, Flowmaster,Superchip, Airaid, Gibson Headers, Island Blue
I installed the F150 Helliwig sway-bar on my 7700. I had to turn it upside down so it would clear. It bolts up just the same and it makes a big difference. Almost eliminates body roll in the corners. Very stable.
Still can't find wheels for my truck. Thanks again for the pics.
------------------
2000 XLT supercab, 4x4 7700lb. package, 5.4L, 3.73 LS,skids,CD changer,MagnaCharger, Flowmaster,Superchip, Airaid, Gibson Headers, Island Blue
#3
*****,
Upside down? Can you post some pics? So there's no confusion when I attempt this weekend job. I already ordered one from JCWhitney. The total was $126.00. I have my fingers crossed, because they didn't have a part # for the 99' F250. I just got the one for the 99' F150's. I hope it clears the rearend.
Check out www.americanracing.com
They have a pretty neat site. And they still list "F250,2+4WD 16 INCH 7-LUG 1997-Present." But only list two wheels.
Also there's a guy on Ebay selling new factory ones. This is his 3rd attempt selling them, because no one is meeting the reserve price. http://cgi.ebay.com/ebaymotors/aw-cg...item=448152737
If I do come upon some new wheels. I'll give you a shout.
Bill
[This message has been edited by Jupiterak (edited 09-29-2000).]
Upside down? Can you post some pics? So there's no confusion when I attempt this weekend job. I already ordered one from JCWhitney. The total was $126.00. I have my fingers crossed, because they didn't have a part # for the 99' F250. I just got the one for the 99' F150's. I hope it clears the rearend.
Check out www.americanracing.com
They have a pretty neat site. And they still list "F250,2+4WD 16 INCH 7-LUG 1997-Present." But only list two wheels.
Also there's a guy on Ebay selling new factory ones. This is his 3rd attempt selling them, because no one is meeting the reserve price. http://cgi.ebay.com/ebaymotors/aw-cg...item=448152737
If I do come upon some new wheels. I'll give you a shout.
Bill
[This message has been edited by Jupiterak (edited 09-29-2000).]