F-250 / Super Duty / Diesel

break controller for '03 F250

Thread Tools
 
Search this Thread
 
  #1  
Old 09-08-2007 | 10:25 PM
lukester18's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2007
Posts: 15
Likes: 0
break controller for '03 F250

I can’t seem to find where to plug in my break controller under the dash. I went to the deal got the pigtail to connect my controller but can’t find the plug. The only open ended plug I found is round and smaller. The one I bought is bigger and square. Am I looking at the right thing, I must be over looking it. Need Help, thanks in advance!
 
  #2  
Old 09-09-2007 | 01:08 AM
F250_mtnbiker's Avatar
Junior Member
Joined: Jul 2007
Posts: 2
Likes: 0
From: Columbus
I have an 04 F250 and the plug for my controller is located to the left of the 4 wheel drive lever.
This image doesn't show the plug, but you can see the cable from the controller going up and behind the dash. It's the cable with the yellow tag touching the 4 wheel drive lever.
Hope this helps?
 
  #3  
Old 09-09-2007 | 01:18 AM
Zaairman's Avatar
Senior Member
Joined: Mar 2005
Posts: 5,843
Likes: 0
From: St. Charles, MO
Keep digging, it's a little more towards the center. Not very easy to get to, but you've only gotta do it once...
 
  #4  
Old 09-09-2007 | 10:10 AM
lukester18's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2007
Posts: 15
Likes: 0
thanks I will go look and see if I can find it, I had been looking more straight under the steering wheel
 




All times are GMT -4. The time now is 09:58 PM.