Let's start over......
Bad news, Couldn't do the alignment. I need new upper control arms because the ball joints are bad and the lower ball joints are bad too. The tech says my steering rack feels bad too but I don't think it is since there is no ratcheting feel and no pump noise, since there would be with metal in the lines.
So I need to replace the UCA's since the ball joint isn't removable, and replace the lower ball joints as well. May go ahead and replace the outer tie rod ends too at the same time.
Pat, you busy? :o
Last edited by Stealth; 03-24-2010 at 02:05 PM.
Good news, shot 92 at golf. Shot well among the bad.
Bad news, Couldn't do the alignment. I need new upper control arms because the ball joints are bad and the lower ball joints are bad too. The tech says my steering rack feels bad too but I don't think it is since there is no ratcheting feel and no pump noise, since there would be with metal in the lines.
So I need to replace the UCA's since the ball joint isn't removable, and replace the lower ball joints as well. May go ahead and replace the outer tie rod ends too at the same time.
Pat, you busy? :o
Bad news, Couldn't do the alignment. I need new upper control arms because the ball joints are bad and the lower ball joints are bad too. The tech says my steering rack feels bad too but I don't think it is since there is no ratcheting feel and no pump noise, since there would be with metal in the lines.
So I need to replace the UCA's since the ball joint isn't removable, and replace the lower ball joints as well. May go ahead and replace the outer tie rod ends too at the same time.
Pat, you busy? :o
On a side note I think I need to start paying golf with you.
Seriously though just let me now and I'll see what I can do.