Let's start over......
Bad news, Couldn't do the alignment. I need new upper control arms because the ball joints are bad and the lower ball joints are bad too. The tech says my steering rack feels bad too but I don't think it is since there is no ratcheting feel and no pump noise, since there would be with metal in the lines.
So I need to replace the UCA's since the ball joint isn't removable, and replace the lower ball joints as well. May go ahead and replace the outer tie rod ends too at the same time.
Pat, you busy? :o
So I need to replace the UCA's since the ball joint isn't removable, and replace the lower ball joints as well. May go ahead and replace the outer tie rod ends too at the same time.
Pat, you busy? :o
Sweet, wanna pay for my wedding too?
Come to think of it I think I should be able to do the work in my driveway. The only thing I'd need is a ball joint press, which I could rent from AZ or Oreilly's. I have everything else to do the work. It's good I don't drive my truck much any more.
About to STORM here. Hear the thunder.
About to STORM here. Hear the thunder.
Just hanging on by the skin of my teeth right now until we sell another big job.
X2
X2
Still wish they would try out Fords.
X2
X2
Still wish they would try out Fords.
Last edited by 06F150STX; 03-24-2010 at 08:57 PM.
Ive got a press in rowlett, just LMK if you want a hand
https://www.f150online.com/forums/19...-moldings.html
Good night,
oh and my other new pics are in Street Scene, but ill post them here real quick
Good night,
oh and my other new pics are in Street Scene, but ill post them here real quick
https://www.f150online.com/forums/19...-moldings.html
Good night,
oh and my other new pics are in Street Scene, but ill post them here real quick
Good night,
oh and my other new pics are in Street Scene, but ill post them here real quick