Let's start over......
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Put it this way.....
I'm not the most popular guy in the building right now....
Poor maintenance led to rotted out piping that popped pin holes and then the air compressor couldn't keep up....the dry valve tripped and the alarm was ignored and the water froze....trashed the hallway and four apartments......
I'm not the most popular guy in the building right now....
Poor maintenance led to rotted out piping that popped pin holes and then the air compressor couldn't keep up....the dry valve tripped and the alarm was ignored and the water froze....trashed the hallway and four apartments......
Last edited by 88racing; 12-14-2010 at 01:21 PM.
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
if you're gonna split open a set, open the harley one and hot glue the reflector back in place
Its marred the inside surface of the light too. Plus there's pieced of junk in there I can see. How hard are they to split open? Don't want to toxify the air in the house.
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
It was 8* here this morning now it's up to 11* windchill was 0-2* according to the weather.
Got to work this morning and there's a white Buick making a bend onto another road doing 50mph and never touched the brakes (main road was clear but sideroads weren't touched) kept going straight went through a ditch, up a hill and through the 84 Lumber fence. I couldn't help but laugh.
Got to work this morning and there's a white Buick making a bend onto another road doing 50mph and never touched the brakes (main road was clear but sideroads weren't touched) kept going straight went through a ditch, up a hill and through the 84 Lumber fence. I couldn't help but laugh.