Do you have a 16d nail laying around?

 

If you think visiting them is bad.....working in them is worse...which I occasionally get to do.....

 

That's what I was driving at....

 

This is true, but three in a month????? I am just worn out and it's worse when kids are there............

 

Nursing homes are the worst to visit in my opinion....
You know they're done....but you don't know when...

With hospitals there's hope for recovery.....

 

Yeah that rizyfiddle guy wants a vacation over a name change refusal? Bonehead. Good luck in douche-dom.

 

This is true, but not always.........I am tired and worn out and there are just to many bad memories of hospitals for me. I think I am going to finish my beer and go to bed.

 

I gave up on it for tonight. I'm about 99% sure I have it together right. I just can't figure out what the problem is.

There's a chain going from the rotating assembly to the lift arm that raises/lowers the deck. The arm isn't raising high (only a 1/2") enough to raise the deck. But the rotating assembly only fits in between the frame rails one way. I'm kind of dumbfounded right now on it.

 

Any pics?

I might have worked on one before....

 

Exactly.......

 

This is the only pic I have, the parts break down.

The Shaft (46) is keyed and so is the Bell Crank (Rotating assembly) (19). The Bell Crank goes between the 2 frame rails and the Shaft goes through it. Then a chain goes from the Bell Crank on to the lift arm.


The way I have the Shaft now the Key way is facing towards the ground and in the picture it's facing up. However, the only way the Bell Crank fits in between the frame is with the Key facing down. Not sure if they have it pictured like that to show it has a Key or not.

 

https://www.f150online.com/forums/qu...e-request.html

 

Yeah that rizyfiddle guy wants a vacation over a name change refusal? Bonehead. Good luck in douche-dom.

 

wow my computer just jumped about 10 years newer with a little work.

I added a second hard drive, my freebie 20G was full to the max, so i added another freebie 160G
and to make room for the second hard drive, i deleted the floppy drive

 

Matt.....I've got to get home first to look at a couple of books....might have an answer tomorrow am.....