F150online Forums

Let's start over......

Thread Tools
 
Search this Thread
 
  #62071  
Old 06-23-2011 | 06:15 PM
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Just got back from the Ford dealership. Went to see if I could just get the clips that hold the flares onto the fender. You can't, have to buy the whole flare which is $80 a piece for the front's. Didn't even bother to ask about the rears.
 
Reply Like
  #62072  
Old 06-23-2011 | 06:16 PM
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...

Originally Posted by Bluejay
When you fart in an airplane, the earth does not move.
The people do.....
 
Reply Like
  #62073  
Old 06-23-2011 | 06:37 PM
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Well, looks like I have to get a new widsheild. Had a huge rock flew up from the truck in front of me and hit it. Its not that bad but those damn windsheid repair kits don't work to good. I just got this windshield about 7 months ago.
 
Last edited by 06F150STX; 06-23-2011 at 06:39 PM.
Reply Like
  #62074  
Old 06-23-2011 | 06:38 PM
Stealth's Avatar
Thread Starter
|
Senior Member
Truck of the Month
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
That blows Randall. I've been driving around with a cracked windshield for a couple of years or so now.
 
Reply Like
  #62075  
Old 06-23-2011 | 06:48 PM
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...

Originally Posted by MTM Ford
Just got back from the Ford dealership. Went to see if I could just get the clips that hold the flares onto the fender. You can't, have to buy the whole flare which is $80 a piece for the front's. Didn't even bother to ask about the rears.
Have you tried tasca?
 
Reply Like
  #62076  
Old 06-23-2011 | 06:51 PM
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Originally Posted by 88racing
Have you tried tasca?
I looked on their site but didn't find anything. I think it's hard navigating around their site to be honest.
 
Reply Like
  #62077  
Old 06-23-2011 | 07:03 PM
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Originally Posted by Stealth
That blows Randall. I've been driving around with a cracked windshield for a couple of years or so now.
Yeah. I have a small crack in mine but that big **** bullseye doesn't look good.
 
Last edited by 06F150STX; 06-23-2011 at 07:39 PM.
Reply Like
  #62078  
Old 06-23-2011 | 09:00 PM
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Just clay barred and waxed the truck. I got the most junk off of the doors, I figured the hood would be the worst. It turned out really good, too bad it's gonna rain tonight.
 
Reply Like
  #62079  
Old 06-23-2011 | 09:46 PM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
That sucks Randall...

Got my Third brake light Matt. I'll post a pick in a few
 
Reply Like
  #62080  
Old 06-23-2011 | 09:58 PM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
http://www.flickr.com/photos/62648936@N05/5864667089/http://www.flickr.com/photos/62648936@N05/5864667089/ by http://www.flickr.com/people/62648936@N05/, on Flickr
 
Reply Like
  #62081  
Old 06-23-2011 | 10:00 PM
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...

Originally Posted by MTM Ford
I looked on their site but didn't find anything. I think it's hard navigating around their site to be honest.
Thats why I usually call them.....
 
Reply Like
  #62082  
Old 06-23-2011 | 10:01 PM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
Been thinking of getting a Kenwood Double Din... by the time I buy the cleansweep and extra wiring for it, I'm over the 349 price of a nice Kenwood...
 
Reply Like
  #62083  
Old 06-23-2011 | 10:03 PM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
I realized I need 5 preamp outputs... this one looks like a winner to me.

JVC
 
Reply Like
  #62084  
Old 06-23-2011 | 10:06 PM
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...

Myself I kind of like the factory one...
 
Reply Like
  #62085  
Old 06-23-2011 | 10:18 PM
TruckGuy24's Avatar
Senior Member
Joined: Jan 2009
Posts: 10,725
Likes: 37
From: Concord, NC
Bastard I think I'm just going to go this route... should be less of a headache. The JVC one looks like an awesome HU. My huge thing with it is that the faceplate detaches... that is such an amazing feature. That's why I was going to do the shaker - didn't want theft. Looks like I'll hold onto the shaker but do this instead. So 449 for the HU, 99 for the box, 119 for the sub and then the amp and sub install kits. I'm still amazed at how much better these Excelon speakers sound off the crappy factory HU. Such a big difference. I think I'm going to pee myself when I get this system done
 
Reply Like



Advanced Search
Quick Reply: Let's start over......


Reply Closed Thread Share

All times are GMT -4. The time now is 02:29 PM.