Headed to cars and coffee this morning

 

Have to change the oil and filter on the Valdez today.

 

Making easy money tight now. Maybe 20 minutes of work and I get paid for 4 hours lol

 

Slacker....

Im changing heads on an 05 mustang gt 4.6 3v(valves are shot)..... customer thought he could do those stupid plugs(same kind as the 5.4 3v) and screwed up big time.....he broke all 8 and never vacuumed the pieces out and ran it(I don't know the full story).....he might be looking at a new block and pistons too....

 

I'm assuming her referring to your barge....

 

Your assumption would be correct sir..........

 

Did a full fluid change on a 2000 7.3 f250 this morning and an oil change on a 2010 f350 last night.....dumb **** boss or one of the others never brought the the fluids in from the storage shed yesterday.....the shelves were bare last night.....gear lube don't like to flow to well when its cold...

 

Guy sounds like some of the special people we have on here

Did you fight the urge at buying a new one Dave lol? O

 

Finished the pneumatics on the dry system yesterday....

 

Morning slackers

Does this seem like a good deal, im lookin to order my gears today
http://www.ebay.com/itm/FORD-9-75-8-...item35b8bb4c2f
I also picked up a back rack yesterdaynot sure if im going to like it, ill throw on some before and after pics later

 

John, I managed to fight off the urge to buy a new one......

 

The gear lube and oil tends to be a little on the thick side when it's cold. The trucks been plugged in over night and the oil has been in a heated garage so I shouldn't have any problems.

 

Back to work....gotta make the boss some moola ....

 

Looks like a good deal....

I always use Yukon gears and never had any issues....the best place to find them is rand's ring and pinion

 

The mustang is puckered.....mmr and fox lake have been contacted...from what I can see in #1 the tip that broke off from the lilse tool did the most damage....scored the cylinder wall bad an found ground straps in the others....