Let's start over......
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Disney has a new ride.....don't even have to leave yer room to go on it....
The Sinkhole>>> http://www.cnn.com/2013/08/12/us/flo...sort-sinkhole/
The Sinkhole>>> http://www.cnn.com/2013/08/12/us/flo...sort-sinkhole/
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Found the new drop I'll be doing when I get myself another DD in a few months
https://www.f150online.com/forums/st...p-05-f150.html
I still can't get the camber out of my truck. The alignment shop got drivers side in spec but the passenger side is still out. Even after I installed the camber kit before taking it in.
This guys set-up looks killer and I have almost everything already, just need the flip kit, new rear drop shocks, and the drop spindles.
https://www.f150online.com/forums/st...p-05-f150.html
I still can't get the camber out of my truck. The alignment shop got drivers side in spec but the passenger side is still out. Even after I installed the camber kit before taking it in.
This guys set-up looks killer and I have almost everything already, just need the flip kit, new rear drop shocks, and the drop spindles.
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Found the new drop I'll be doing when I get myself another DD in a few months
https://www.f150online.com/forums/st...p-05-f150.html
I still can't get the camber out of my truck. The alignment shop got drivers side in spec but the passenger side is still out. Even after I installed the camber kit before taking it in.
This guys set-up looks killer and I have almost everything already, just need the flip kit, new rear drop shocks, and the drop spindles.
https://www.f150online.com/forums/st...p-05-f150.html
I still can't get the camber out of my truck. The alignment shop got drivers side in spec but the passenger side is still out. Even after I installed the camber kit before taking it in.
This guys set-up looks killer and I have almost everything already, just need the flip kit, new rear drop shocks, and the drop spindles.
I'm worn out reading about it. May have to go home.
__________________
Jim
Jim
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
My shoulder hates me today.....
Loaded ammo Saturday morning.
75 rounds of 12ga shooting skeet Saturday morning.
Throwing a football for the kids at the picnic
10 rounds of .308 yesterday reconfirming the zero on one of my rifles.
I'd do it all over again given the chance it was a fun weekend with some great friends.
Loaded ammo Saturday morning.
75 rounds of 12ga shooting skeet Saturday morning.
Throwing a football for the kids at the picnic
10 rounds of .308 yesterday reconfirming the zero on one of my rifles.
I'd do it all over again given the chance it was a fun weekend with some great friends.
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
My shoulder hates me today.....
Loaded ammo Saturday morning.
75 rounds of 12ga shooting skeet Saturday morning.
Throwing a football for the kids at the picnic
10 rounds of .308 yesterday reconfirming the zero on one of my rifles.
I'd do it all over again given the chance it was a fun weekend with some great friends.
Loaded ammo Saturday morning.
75 rounds of 12ga shooting skeet Saturday morning.
Throwing a football for the kids at the picnic
10 rounds of .308 yesterday reconfirming the zero on one of my rifles.
I'd do it all over again given the chance it was a fun weekend with some great friends.
glad ya had fun
hopefully your shoulder gets better
Last edited by 88racing; 08-12-2013 at 09:45 AM.