Did a 6" lift today (Patman style)
#7
Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes
on
14 Posts
Trending Topics
#9
#10
#12
I bought it used this past feburary and have been happy, i had a "side cabinet" that i used as my starter box, and i still have it and will bring it back to work when i start to outgrow this one
yah i used 3" screws and it only went through 2 layers, so yah 4.5" is pretty close, plus i dished them out to keep the casters from free rolling off the block of wood, so take another 1/8" off of that too
nah thats why I have the red truck
take it back off and roll it, it took about 2 minutes to place them using a floor jack, so even less take down time
Nah this was quick cheap and stable
see above
yah i used 3" screws and it only went through 2 layers, so yah 4.5" is pretty close, plus i dished them out to keep the casters from free rolling off the block of wood, so take another 1/8" off of that too
nah thats why I have the red truck
take it back off and roll it, it took about 2 minutes to place them using a floor jack, so even less take down time
Nah this was quick cheap and stable
see above