Well i've recently been wanting to order a chip from sal at PSP but need a little bit of help. I have a 2002 blue lightning.

Mods are: FTVB , JLP Ram Air, Boost Bypass, Hypertech 160*

I want the chip to be aggressive. The main question i am asking is what should i ask for to be programmed into the chip or would sal know according to my mods.

I know that i want Torque Reduction to be turned off and the line pressure to be left stock b/c of the FTVB, but is there anything else that i need to specifically ask for. Another thing is that my truck seemed to ping when it was stock, but the pinging has faded away, is there anything i need to do to keep it that way.

Sorry about all the questions, i've already tried searching but couldn't find everything i needed. Thanks a lot for any help.

 

I believe his new program also has the boost bypass built into it. So you might want to find out if you need to uninstall the kit you have installed.

 

Let Sal know what your mods are. He'll take care of the rest. He did a good job with mine.