Lightning

Prep work for the 6lb lower pulley

Thread Tools
 
Search this Thread
 
  #1  
Old 03-20-2004 | 11:42 PM
Bob Tompkins's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2001
Posts: 1,018
Likes: 0
From: Florida
Prep work for the 6lb lower pulley

Tonight I decided to get off my *** and get the blower off, clean the intercooler, and do the plugs at the same time. The truck was bone stock until I got two weeks ago it has 18k miles on it and the intake was farily clean but the intercooler was pretty nasty. I cleaned it with about 7 cans of brake cleaner blew it out with air. Then sprayed the intake and wiped off the residue.

Hopefully the ev98b PCV valve and the dime will take care of the problem from now on.

Doing the plugs and reassemble in the morning, it was fairly easy deal just a little rough on my back. Thank god for step stools

Bob
 
  #2  
Old 03-20-2004 | 11:50 PM
Casey02L's Avatar
Senior Member
Joined: Sep 2003
Posts: 1,412
Likes: 0
From: Florida
Where is the pictures at Bob
 
  #3  
Old 03-20-2004 | 11:55 PM
Bob Tompkins's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2001
Posts: 1,018
Likes: 0
From: Florida
Originally posted by Casey02L
Where is the pictures at Bob
I will take some in the morning.... I did get two shots of the intercooler in the tyuck before I cleaned it.

 
  #4  
Old 03-21-2004 | 12:03 AM
lightninquick's Avatar
Senior Member
Joined: Feb 2004
Posts: 1,049
Likes: 0
i wake up with the back of my legs sore after i change the plugs

you might want to do the install in the afternoon
 



Quick Reply: Prep work for the 6lb lower pulley



All times are GMT -4. The time now is 02:32 AM.