Wasp Blowers
#1
Wasp Blowers
So how's everybodies wasp blowers panning out? Any dyno's with them? Im tossing around the ported eaton route and im not sure if im going to go through with it or not, seems to have mixed reviews. Im thinking this fall things will change with that though. So if ya gotta wasp, chime in, let me know how its goin. Or even wes, shoot some details, etc. My only main issue w/ the eaton port, is i just wont be satisfied if i lose torque...hope thats not the ongoing trend. Anyhow, thanks
#7
Trending Topics
#8
#9
#11
Originally posted by Red03SVT
just thought I'd ask--what is a "wasp" blower? another porting company(I guess?)? if so, what kinds of gains are seen compared to the standard apten?
-Mike
just thought I'd ask--what is a "wasp" blower? another porting company(I guess?)? if so, what kinds of gains are seen compared to the standard apten?
-Mike
#12
Wasp
No complaints......picked up over 20 hp , but lost a little bit of torque. Not surprised but has happened on many trucks. I'm only running a 4lb lower. Ported blowers like to be spun, no doubt about it.
Eluzion had his done the same time. Picked up over 20 hp, went from a 4 to a 6lb lower and picked up about 20 ft lbs. What ever that rpm difference is made all the difference in the world. I'm just not brave enough to go to a 6 yet.
My mph is up about 2mph and i picked up over a tenth running in the heat. We'll see in the fall.
Eluzion had his done the same time. Picked up over 20 hp, went from a 4 to a 6lb lower and picked up about 20 ft lbs. What ever that rpm difference is made all the difference in the world. I'm just not brave enough to go to a 6 yet.
My mph is up about 2mph and i picked up over a tenth running in the heat. We'll see in the fall.