who are the best L tuners in FL or close to
#1
who are the best L tuners in FL or close to
im going to upgrade the Blower soon either Magnum or KB
and want a good street tune from a good tuner
within 200- 300 miles from NW Florida like pencacola, P.C. area
any suggestions would be greatly appreciated
im going to regain my title from that WS6 if its the last thing i do
and want a good street tune from a good tuner
within 200- 300 miles from NW Florida like pencacola, P.C. area
any suggestions would be greatly appreciated
im going to regain my title from that WS6 if its the last thing i do
#2
#6
#7
Trending Topics
#8
Originally posted by 02Thunder
Tim Barth at T&J Performance, in GA, is a good bet. He is tuning with SCT software, and has been putting out big numbers for awhile.
Joe
Tim Barth at T&J Performance, in GA, is a good bet. He is tuning with SCT software, and has been putting out big numbers for awhile.
Joe
#9
You may want to consider just sucking it up and doing some driving. I have the MP on a stock block tuned by JDM in Jersey and have been quite impressed. I recently had the new SCT software installed by Jim and the truck ran 11's in high heat with just the front swaybar, and spare tire removed (slicks of course). I have taken the time to go to his shop in Freehold several times (not as far as you would have to go but....) and my truck has always ran great. Also consider one of the FFW events. They (JDM) may be able to take care of your needs then or even at a semi-private tuning event (check with a local Lightning/Cobra chapter). Or just call and see what they can do. Just my take, from my own positive experiences.
#10
You need to go to running with the devil James is the man when it comes to tuning.He is in Mobile Ala. he is doing a Dyno tune day in trussville Ala on August 7th.
Here is a link to his web site:
http://www.diablosporttuning.com/forums/
He can dyno tune it foe you and sounds like he is alot closer to you than he is me.
jeff
Here is a link to his web site:
http://www.diablosporttuning.com/forums/
He can dyno tune it foe you and sounds like he is alot closer to you than he is me.
jeff
#14
Originally posted by JohnFastruk
You may want to consider just sucking it up and doing some driving. I have the MP on a stock block tuned by JDM in Jersey and have been quite impressed. I recently had the new SCT software installed by Jim and the truck ran 11's in high heat with just the front swaybar, and spare tire removed (slicks of course). I have taken the time to go to his shop in Freehold several times (not as far as you would have to go but....) and my truck has always ran great. Also consider one of the FFW events. They (JDM) may be able to take care of your needs then or even at a semi-private tuning event (check with a local Lightning/Cobra chapter). Or just call and see what they can do. Just my take, from my own positive experiences.
You may want to consider just sucking it up and doing some driving. I have the MP on a stock block tuned by JDM in Jersey and have been quite impressed. I recently had the new SCT software installed by Jim and the truck ran 11's in high heat with just the front swaybar, and spare tire removed (slicks of course). I have taken the time to go to his shop in Freehold several times (not as far as you would have to go but....) and my truck has always ran great. Also consider one of the FFW events. They (JDM) may be able to take care of your needs then or even at a semi-private tuning event (check with a local Lightning/Cobra chapter). Or just call and see what they can do. Just my take, from my own positive experiences.
Yup...what he said
FF
#15