Painting lower pulley...
#1
Painting lower pulley...
I want to paint my single piece lower JLP pulley. How should I do this?
I figured...
1. Tape off all belt contact surfaces.
2. scotch brite the surface
3. 3 or 4 coats of hi temp black paint
4. Make sure all belt contact surfaces are as they were before painting.
Sound good? The reason is obvious. Sneaky mods are better mods.
I figured...
1. Tape off all belt contact surfaces.
2. scotch brite the surface
3. 3 or 4 coats of hi temp black paint
4. Make sure all belt contact surfaces are as they were before painting.
Sound good? The reason is obvious. Sneaky mods are better mods.