just posting some pics
#1
just posting some pics
Just got a new digital camera so here goes.
Nuff said, most people don't get this one!
Got to listen to some toons every now and then.
We don't need no stinking curb feelers for valve stems!
This is the spiral wrapping that I posted earlier.
[This message has been edited by f1car (edited 07-01-2000).]
Nuff said, most people don't get this one!
Got to listen to some toons every now and then.
We don't need no stinking curb feelers for valve stems!
This is the spiral wrapping that I posted earlier.
[This message has been edited by f1car (edited 07-01-2000).]
#4
Hey Guy,
I see your truck is missing that plastic cover that goes on the wires behind the battery. Mine is also.
If you get tired of your new camera feel free to send it to me.
Alvin
------------------
99 Lightning, 3.73 gear, full Bassani exhaust, Swanson Performance chip,powertube,undersized pully,Transgo shift kit, Pro-M MAS,cobra type hood with yellow stripes, best et. of 13.1, dyno'ed at 378rwhp.
http://www.zing.com/album/?id=4294235379
I see your truck is missing that plastic cover that goes on the wires behind the battery. Mine is also.
If you get tired of your new camera feel free to send it to me.
Alvin
------------------
99 Lightning, 3.73 gear, full Bassani exhaust, Swanson Performance chip,powertube,undersized pully,Transgo shift kit, Pro-M MAS,cobra type hood with yellow stripes, best et. of 13.1, dyno'ed at 378rwhp.
http://www.zing.com/album/?id=4294235379
#5
For those that asked about the camera, it's a Sony DSC-S50. Believe it or not this was the lowest setting on the camera 640X480 or 307,200 pixels the highest is 1600X1200 or pixels 1,920,000, but this would take all day to download, also viewers could only see about 1/4 of the picture without having to scroll all over the place.
BTW I think it's going to be a long time before I'm bored with this camera, I think it's smarter than I am?!?
BTW I think it's going to be a long time before I'm bored with this camera, I think it's smarter than I am?!?
#7
Hi Doug,
Good to hear from you, I've been in Montreal the last couple of weeks, but I'm looking foward to comming to one of your drag racing events soon enough.
I'm thinking about changing my setup once again for Swanssons setup plus a smaller pulley, but I've seen from Sean motor sports that you need a special MAF to get anything from the MAF (w/small pulley) after 4000 rpm??? I still am thinking about the aluminum 500ci with my Eaton.
Good to hear from you, I've been in Montreal the last couple of weeks, but I'm looking foward to comming to one of your drag racing events soon enough.
I'm thinking about changing my setup once again for Swanssons setup plus a smaller pulley, but I've seen from Sean motor sports that you need a special MAF to get anything from the MAF (w/small pulley) after 4000 rpm??? I still am thinking about the aluminum 500ci with my Eaton.