Intercooler Res. II
#48
To all who are losing intercooler coolant,
If you live in an area where the chance of freezing temps has passed, just put in plain water until you get the problem fixed. This should prevent any damage to sensors or cats. A little water injection won't hert a thing.
------------------
White 1999 Lightning
Build Date 7-26-99
#2892
Snuglid
Bedrug
Superchip
Member NLOC
If you live in an area where the chance of freezing temps has passed, just put in plain water until you get the problem fixed. This should prevent any damage to sensors or cats. A little water injection won't hert a thing.
------------------
White 1999 Lightning
Build Date 7-26-99
#2892
Snuglid
Bedrug
Superchip
Member NLOC
#51
Picked her up late yesterday. Seems to work just fine.
Service Manager said they took off everything, including the heads. Roush came over with a complete built up assembly (including a new supercharger, intercooler & intake manifold) which was carefully torqued down. Seems Roush thinks flexing may be causing the coil failures. Oil and both coolent systems were flushed. Spark plugs were replaced and the O2 sensors checked (passed).
I asked for the old supercharger to give to my brother's automotive education lab, but Roush had already shipped it to Gates(?) for analysis.
At first I couldn't get more than 6 PSI max. Then with a little right foot exercise it started to almost touch 10 PSI.
I'm glad this was on Ford's dime as I'm sure it would have cost me >$3,000. Cross your fingers and watch that intercooler coolent level.
Service Manager said they took off everything, including the heads. Roush came over with a complete built up assembly (including a new supercharger, intercooler & intake manifold) which was carefully torqued down. Seems Roush thinks flexing may be causing the coil failures. Oil and both coolent systems were flushed. Spark plugs were replaced and the O2 sensors checked (passed).
I asked for the old supercharger to give to my brother's automotive education lab, but Roush had already shipped it to Gates(?) for analysis.
At first I couldn't get more than 6 PSI max. Then with a little right foot exercise it started to almost touch 10 PSI.
I'm glad this was on Ford's dime as I'm sure it would have cost me >$3,000. Cross your fingers and watch that intercooler coolent level.
#52
#54
I just got off the phone with my service rep and will stop by this afternoon to add some dye and then we will check the manifold for signs of fluid through the intake...
So as far as I can tell the steps are:
1) Check coolant level.
2) If losing fluid chech for hoses and clamps
3) If clamps/hoses are good, check for coolant in intake.
4) If coolant in intake, replace intercooler, maybe replace engine complete?
How do you determine/convince your dealer to replace the complete engine ? I do not enjoy the thought of running fluid through the engine...
[This message has been edited by BlackLight (edited 08-08-2000).]
So as far as I can tell the steps are:
1) Check coolant level.
2) If losing fluid chech for hoses and clamps
3) If clamps/hoses are good, check for coolant in intake.
4) If coolant in intake, replace intercooler, maybe replace engine complete?
How do you determine/convince your dealer to replace the complete engine ? I do not enjoy the thought of running fluid through the engine...
[This message has been edited by BlackLight (edited 08-08-2000).]
#55
a friend of mine has the intercooler leak! i don't normally go on the lighting board. but he asked me if there was anything about it on the site? i was impressed! so it is off to the dealer!!!
for anybody who is taking info 1999 #2120
------------------
1999 F-150 5.4 SB,FS, AUTO,BLACK XL, 3.55 GR
K&N MOD, CATBACK, SUPERCHIP, 275-16 ON POLISHED 16X8 PYTHONS.3-4 BELL TECH DROP
POLISHED ALU GRILL, BLACK FLUSH CHECKMATE TONN COVER
CLEARS ALWAY AROUND,STREET SMART MIRRORS
WISH-LIST: F-1 COBRA HOOD,PULLYS,ELECT FAN,POWERAID,ON&ON.
for anybody who is taking info 1999 #2120
------------------
1999 F-150 5.4 SB,FS, AUTO,BLACK XL, 3.55 GR
K&N MOD, CATBACK, SUPERCHIP, 275-16 ON POLISHED 16X8 PYTHONS.3-4 BELL TECH DROP
POLISHED ALU GRILL, BLACK FLUSH CHECKMATE TONN COVER
CLEARS ALWAY AROUND,STREET SMART MIRRORS
WISH-LIST: F-1 COBRA HOOD,PULLYS,ELECT FAN,POWERAID,ON&ON.
#56
#57
Hey Noelvm did they say anything to you about the supercharge torque to yield bolts being on backorder? TMV finally got my intercooler, but no bolts *agghhhh* I have been without my truck for over a month now.
oh well...maybe tomorrow or Friday.
------------------
Mike B. '92 GT, '99 GT convertible, '99.5 Lightning
Houston Performance Chip
Pro-M 80 MAF
Bassani Full exhaust
Best ET 13.16@103.84
oh well...maybe tomorrow or Friday.
------------------
Mike B. '92 GT, '99 GT convertible, '99.5 Lightning
Houston Performance Chip
Pro-M 80 MAF
Bassani Full exhaust
Best ET 13.16@103.84
#58