The best 6lb pulley
#1
#2
Get a 2 piece pulley, Metco is what must venders sell.
Your going to need to get a belt also to go with that pulley.
As for the FTVB is made by Greg Evans, Any vendor should know what your talking about. If not, run away FAST!
Chickenears has both, one stop shopping!
http://www.chickenears.com/index.htm
Your going to need to get a belt also to go with that pulley.
As for the FTVB is made by Greg Evans, Any vendor should know what your talking about. If not, run away FAST!
Chickenears has both, one stop shopping!
http://www.chickenears.com/index.htm
#4
The Cog!
There's a guy here in Cincy with a silver 'Bolt and a cog drive. Not very wide choice of pulley sizes, I think, but that thing sounds AWESOME!
I run a Metco/LFP lower, Metco aux idlers, and a SFPH toothed upper. Right around 16 PSI in good air, no slippage whatsoever. The non-slip upper will shred your belt for a while until it gets the ribs to the "proper" profile, though.
I run a Metco/LFP lower, Metco aux idlers, and a SFPH toothed upper. Right around 16 PSI in good air, no slippage whatsoever. The non-slip upper will shred your belt for a while until it gets the ribs to the "proper" profile, though.