BIG thanks to PITSTAIN!!!
#1
BIG thanks to PITSTAIN!!!
yesterday Ian Pitstain came over to my house to help me install my new custom dual fan setup.. about a week ago my old style JDM fan crapped out on me, i purchased it used off an NLOC member and got about two years of use out of it.. anyway, i needed to get my truck back on the road, Ian and I did some homework and after some searching I decided to go to Summit Racing and order TWO 16" DERALE fans, over nighted to me it was under $300!! now for the controlers, for now Ian gave me 2 Troyer controlers to use for the setup. the setup is running flawless and pushes alot of air to cool the beast.. the best part about the new setup is i have ALOT of room to work between the fans and the front of the engine now.. you may ask well without the factory shroud how did I retain the intercooler resevoir, i cut with Dremel the factory shroud where it would bolt to, i then put a nut and bolt through an existing hole on the top of the radiator "after drilling a hole in the top of the shroud" it is very secure and does not budge at all. here are a couple of pics took with my camera phone.. enjoy..
Last edited by Hostile03SVT; 07-18-2007 at 03:46 PM.
#2
#5
#7
Trending Topics
#8
Originally Posted by pitstain
not as good as the cuts all over my hands and arms......
#13
Originally Posted by brahmus
Nice! Keep an eye on the troyer controllers, I had a few crap out on me. Have you looked into other controllers. Spal or DC controller?
#14