RTKILLA-

Noticed your adress. Were you up at 75th last Thur. night? I came up there with the white L. I need some advice on upgrades. If this isn't who I think it is nevermind.

 

Well I talked to sal about it and he said he was using the American racing black steel wheels and they looked good to me so I ordered those last week. going to pick them up today, $48.00 a piece and 1.00 a lug nut i got them for. This will work for now I guess. I just need some slicks for the track big time, especially when I run the NOS. I want to blast out of the hole with a 100 shot on top of all the mods.

Spiro I checked out the wet kit from NX and it looks really nice to me, I talked to that guy down in texas and he gave me some really good prices on the EFI kit and the Genx2 kit. I going to go with that kit, so we'll see what happens. That won't be till after byron coming up though. I need to save about $1000.00 for the NOS and the gauges, pillar, and anything else. Speed is addicting. How did you like the PSP program, my four way chip is coming this week, can't wait to try it out with the 90mm over the old R9 superchip. BOOST!!!!!

 

Kevin this is who you think it is. JOE.

hey if your looking for tips on your truck, your at the right place. Just don't let anybody know whats going on with the truck and you can suprize allot of people on the street racing if you want. Next to pete that night, I had one of the fastest vehicles there, so think of the possiblitys for your ride. But I must warn you, it gets very addicting.

------------------

She has allot of toys on her.
MY BABIES STAT'S
Built 5/4/99
# 917 of 4000
2001 ET: 12.???, we'll find out soon.
When the green light drops, the bullsh*t stops.
MY ZING ALBUM: http://www.zing.com/album/?id=4293132307

 

Hey I forgot what you changed your throttel body to. I want to stay away from swaping to the cobra's because of the fabrication that has to be done.

 

I bought mine with the fabrication already done to it. the install took 15 minutes for real. you can but them lightning at allot of places. the mod is complete reverseable with no changes to the stock truck.

 

RTKiILLA, go with the 11.5's a 9" rim is optimum. If you go too small on the rim you lose contact area. 16x8's or 16x10's will work too. Lloyd

 

I run the 11.5s on American Racing Aluminium 16x10" wheels- with the flat footprint, by NOT bringing in the side wall, I can run my tires as low as 15 lbs pressure without a wiggle on the high end.

Dan

------------------
PSP TOTALLY MODIFIED
Best ET 12.57
Best MPH 107.89
Best 60 ft 1.72
So-Far!!
Man, I LOVE These PSP PRODUCTS!!!
(Thanks Sal!!!!)

 

I just want to know what size E.T. street I can run in the back without any problems.

either the 26x11.5, or the 26x10.5 both in a 16 inch rim.

will the 26x11.5 fit in back.

------------------

She has allot of toys on her.
MY BABIES STAT'S
Built 5/4/99
# 917 of 4000
2001 ET: 12.???, we'll find out soon.
When the green light drops, the bullsh*t stops.
MY ZING ALBUM: http://www.zing.com/album/?id=4293132307

 

KILLA,

Both those size will fit without any problems, and many use them here with great results. I do believe that many are also using them on a 10 inch wide wheel as well, but I would prefer a 8 or 9 inch. For my ET drag's, I used 2 spare tire wheels, simple affordable and effective as well.

For this season, I will be running a taller tire on a 15 inch wheel. I have a set of 28 X 12.5 X 15 that I plan to use. The are actually 28.2 inches tall, and only has a tread width of 9.9 on this big tire.

Hope this helps

------------------
Spiro-
12.373 @ 110.15
Best 60' 1.76
@ 4700 without the Go-Go juice

12.32 @ 113.82 with the Go-Go juice @ 4820 lbs.

-Stock Meter
-Stock TB
-Stock Heads
-Stock motor
-Stock Torque Convertor

Empty Pockets Racing DE-NJ

 

Spiro-

What were the spares off of? I heard of people using Expedition spares(16x7).

 

I bought mine at tirerack for around 40 bucka piece. They are same spare that are found on the F150's with 16 inchers..hope this helps